dt-bindings: net: renesas,ethertsn: Create child-node for MDIO bus

The bindings for Renesas Ethernet TSN was just merged in v6.9 and the
design for the bindings followed that of other Renesas Ethernet drivers
and thus did not force a child-node for the MDIO bus. As there
are no upstream drivers or users of this binding yet take the
opportunity to correct this and force the usage of a child-node for the
MDIO bus.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240330131228.1541227-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml
index ea35d19be829a37a657f6a3fb45153981ea16fb9..b4680a1d0a068ed6c5d128c503ee5c2da9dfa476 100644 (file)
--- a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml
@@ -71,16 +71,8 @@ properties:
     enum: [0, 2000]
     default: 0
 
-  '#address-cells':
-    const: 1
-
-  '#size-cells':
-    const: 0
-
-patternProperties:
-  "^ethernet-phy@[0-9a-f]$":
-    type: object
-    $ref: ethernet-phy.yaml#
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
     unevaluatedProperties: false
 
 required:
@@ -94,8 +86,7 @@ required:
   - resets
   - phy-mode
   - phy-handle
-  - '#address-cells'
-  - '#size-cells'
+  - mdio
 
 additionalProperties: false
 
@@ -122,14 +113,18 @@ examples:
         tx-internal-delay-ps = <2000>;
         phy-handle = <&phy3>;
 
-        #address-cells = <1>;
-        #size-cells = <0>;
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-        phy3: ethernet-phy@3 {
-            compatible = "ethernet-phy-ieee802.3-c45";
-            reg = <0>;
-            interrupt-parent = <&gpio4>;
-            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
             reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+            reset-post-delay-us = <4000>;
+
+            phy3: ethernet-phy@0 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <0>;
+                interrupt-parent = <&gpio4>;
+                interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+            };
         };
     };