ARM: dts: s5pv210: move fixed regulators under root node in Goni

The fixed regulators are kept under dedicated "regulators" node but this
causes multiple dtschema warnings:

  regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
  regulators: #size-cells:0:0: 0 is not one of [1, 2]
  regulators: fixed-regulator@0:reg:0: [0] is too short
  regulators: fixed-regulator@1:reg:0: [1] is too short
  regulators: fixed-regulator@2:reg:0: [2] is too short
  regulators: fixed-regulator@3:reg:0: [3] is too short

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200907161141.31034-22-krzk@kernel.org

diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index 20f1c27738055a5db19a63a677ac8f7aa9d7d5b9..eec6531e6ef80d8cdfa360d43c4754b7ca31ec2a 100644 (file)
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -42,46 +42,36 @@
                clock-frequency = <32768>;
        };
 
-       regulators {
-               compatible = "simple-bus";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               vtf_reg: fixed-regulator@0 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "V_TF_2.8V";
-                       regulator-min-microvolt = <2800000>;
-                       regulator-max-microvolt = <2800000>;
-                       reg = <0>;
-                       gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
-                       enable-active-high;
-               };
+       vtf_reg: regulator-0 {
+               compatible = "regulator-fixed";
+               regulator-name = "V_TF_2.8V";
+               regulator-min-microvolt = <2800000>;
+               regulator-max-microvolt = <2800000>;
+               gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
 
-               pda_reg: fixed-regulator@1 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "VCC_1.8V_PDA";
-                       regulator-min-microvolt = <1800000>;
-                       regulator-max-microvolt = <1800000>;
-                       reg = <1>;
-               };
+       pda_reg: regulator-1 {
+               compatible = "regulator-fixed";
+               regulator-name = "VCC_1.8V_PDA";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
 
-               bat_reg: fixed-regulator@2 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "V_BAT";
-                       regulator-min-microvolt = <3700000>;
-                       regulator-max-microvolt = <3700000>;
-                       reg = <2>;
-               };
+       bat_reg: regulator-2 {
+               compatible = "regulator-fixed";
+               regulator-name = "V_BAT";
+               regulator-min-microvolt = <3700000>;
+               regulator-max-microvolt = <3700000>;
+       };
 
-               tsp_reg: fixed-regulator@3 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "TSP_VDD";
-                       regulator-min-microvolt = <2800000>;
-                       regulator-max-microvolt = <2800000>;
-                       reg = <3>;
-                       gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
-                       enable-active-high;
-               };
+       tsp_reg: regulator-3 {
+               compatible = "regulator-fixed";
+               regulator-name = "TSP_VDD";
+               regulator-min-microvolt = <2800000>;
+               regulator-max-microvolt = <2800000>;
+               gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
        };
 
        i2c_pmic: i2c-pmic {