dt-bindings: display: tegra: Update SOR for Tegra186

Update the SOR bindings for Tegra186, in which a new property is
required to identify the instance of the SOR interface and the clock
tree has slightly changed as well.

Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 844e0103fb0dac15220794cfde75f6d58b2c4d73..593be44a53c9527774c35ca9331f9b25e23d97cd 100644 (file)
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -206,21 +206,33 @@ of the following host1x client modules:
     - "nvidia,tegra132-sor": for Tegra132
     - "nvidia,tegra210-sor": for Tegra210
     - "nvidia,tegra210-sor1": for Tegra210
+    - "nvidia,tegra186-sor": for Tegra186
+    - "nvidia,tegra186-sor1": for Tegra186
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
     See ../clocks/clock-bindings.txt for details.
   - clock-names: Must include the following entries:
     - sor: clock input for the SOR hardware
-    - source: source clock for the SOR clock
+    - out: SOR output clock
     - parent: input for the pixel clock
     - dp: reference clock for the SOR clock
     - safe: safe reference for the SOR clock during power up
+
+    For Tegra186 and later:
+    - pad: SOR pad output clock (on Tegra186 and later)
+
+    Obsolete:
+    - source: source clock for the SOR clock (obsolete, use "out" instead)
+
   - resets: Must contain an entry for each entry in reset-names.
     See ../reset/reset.txt for details.
   - reset-names: Must include the following entries:
     - sor
 
+  Required properties on Tegra186 and later:
+  - nvidia,interface: index of the SOR interface
+
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection