ARM: dts: imx7d-sdb: config the max pressure for tsc2046

[ Upstream commit e7c4ebe2f9cd68588eb24ba4ed122e696e2d5272 ]

Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,

[17:19:39.183] event1  - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1  - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1  - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1  - not using input device '/dev/input/event1'

This will then cause the APP weston-touch-calibrator can't list touch devices.

root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.

And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index e5f1bdbe79921671d6b77f9afcfe1e0c5e71a518..4e1a6cde90fe3cf197b7d45f8b5bfa5666a364fe 100644 (file)
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -206,12 +206,7 @@
                interrupt-parent = <&gpio2>;
                interrupts = <29 0>;
                pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-               ti,x-min = /bits/ 16 <0>;
-               ti,x-max = /bits/ 16 <0>;
-               ti,y-min = /bits/ 16 <0>;
-               ti,y-max = /bits/ 16 <0>;
-               ti,pressure-max = /bits/ 16 <0>;
-               ti,x-plate-ohms = /bits/ 16 <400>;
+               touchscreen-max-pressure = <255>;
                wakeup-source;
        };
 };