dt-bindings: interrupt-controller: Merge BCM3380 with BCM7120

The two bindings are very similar and should be covered by the same
document, do that so we can get rid of an additional binding file.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211217160546.497012-3-f.fainelli@gmail.com

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644 (file)
index 37aea40..0000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets.  It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
-  different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
-  <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
-       compatible = "brcm,bcm3380-l2-intc";
-       reg = <0x10000024 0x4 0x1000002c 0x4>,
-             <0x10000020 0x4 0x10000028 0x4>;
-       interrupt-controller;
-       #interrupt-cells = <1>;
-       interrupt-parent = <&cpu_intc>;
-       interrupts = <2>;
-};

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
index 5d7731ea418210efb6f30d9bac31e4aeaeaced3e..46b2eb3c43ee435d1bf4b96e9cf9411d3a2a95fb 100644 (file)
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM7120-style Level 2 interrupt controller
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
@@ -59,15 +59,29 @@ description: >
   ..
   31 ........................ X
 
+  The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#
 
 properties:
   compatible:
-    const: brcm,bcm7120-l2-intc
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
     description: >
       Specifies the base physical address and size of the registers
 
@@ -124,3 +138,14 @@ examples:
       brcm,int-map-mask = <0xeb8>, <0x140>;
       brcm,int-fwd-mask = <0x7>;
     };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+       compatible = "brcm,bcm3380-l2-intc";
+       reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+             <0x10000020 0x4>, <0x10000028 0x4>;
+       interrupt-controller;
+       #interrupt-cells = <1>;
+       interrupt-parent = <&cpu_intc>;
+       interrupts = <2>;
+    };