leds: ktd2692: Fix a typo in the name of a constant

There is a typo in KTD2962_MM_MIN_CURR_THRESHOLD_SCALE. 6 and 9 are
switched in 2962.

Define and use KTD2692_MM_MIN_CURR_THRESHOLD_SCALE instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Enrico Weigelt <info@metux.net>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
index f63918206bfbd4180f574f8e130cad50bf9d7671..670efee9b1317affa4eb80d2c4f8866223e96cdf 100644 (file)
--- a/drivers/leds/leds-ktd2692.c
+++ b/drivers/leds/leds-ktd2692.c
@@ -19,7 +19,7 @@
 /* Value related the movie mode */
 #define KTD2692_MOVIE_MODE_CURRENT_LEVELS      16
 #define KTD2692_MM_TO_FL_RATIO(x)              ((x) / 3)
-#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE    8
+#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE    8
 
 /* Value related the flash mode */
 #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS      8
@@ -250,7 +250,7 @@ static void ktd2692_setup(struct ktd2692_context *led)
        ktd2692_expresswire_reset(led);
        gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
 
-       ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1)
+       ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
                                 | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
        ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
                                 | KTD2692_REG_FLASH_CURRENT_BASE);