arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140

Set Pull Resistors Enable bit to put signal into a defined state.

Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 7df8fafbbb904d329c55fe2b6c7cc9676f4f856d..b2579fd5519153b4f90a59f8411f0026e052e040 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -386,8 +386,8 @@
 
        pinctrl_uart1: uart1grp {
                fsl,pins = <
-                       MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX    0x40
-                       MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX    0x40
+                       MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX    0x140
+                       MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX    0x140
                >;
        };