ARM: dts: at91: Reenable UART TX pull-ups

Pull-ups for SAM9 UART/USART TX lines were disabled in a previous
commit. However, several chips in the SAM9 family require pull-ups to
prevent the TX lines from falling (and causing an endless break
condition) when the transceiver is disabled.

From the SAM9G20 datasheet, 32.5.1: "To prevent the TXD line from
falling when the USART is disabled, the use of an internal pull up
is mandatory.". This commit reenables the pull-ups for all chips having
that sentence in their datasheets.

Fixes: 5e04822f7db5 ("ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx")
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20191203142147.875227-1-inguin@gmx.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index dee9c0c8a096450bb34a1ef7a08588b2b3331c27..16c6fd3c42462b9bcff9ea96023e8154ad298951 100644 (file)
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -187,7 +187,7 @@
                                usart0 {
                                        pinctrl_usart0: usart0-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -221,7 +221,7 @@
                                usart1 {
                                        pinctrl_usart1: usart1-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -239,7 +239,7 @@
                                usart2 {
                                        pinctrl_usart2: usart2-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -257,7 +257,7 @@
                                usart3 {
                                        pinctrl_usart3: usart3-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -275,7 +275,7 @@
                                uart0 {
                                        pinctrl_uart0: uart0-0 {
                                                atmel,pins =
-                                                       <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+                                                       <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
                                                         AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
                                        };
                                };
@@ -283,7 +283,7 @@
                                uart1 {
                                        pinctrl_uart1: uart1-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
                                };

diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index dba025a98527027f202fc3ce7e01a0cc051ad679..5ed3d745ac86764276477a707ef1097e30cd783d 100644 (file)
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -329,7 +329,7 @@
                                usart0 {
                                        pinctrl_usart0: usart0-0 {
                                                atmel,pins =
-                                                       <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+                                                       <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
                                                        <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -347,7 +347,7 @@
                                usart1 {
                                        pinctrl_usart1: usart1-0 {
                                                atmel,pins =
-                                                       <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+                                                       <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
                                                        <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -365,7 +365,7 @@
                                usart2 {
                                        pinctrl_usart2: usart2-0 {
                                                atmel,pins =
-                                                       <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+                                                       <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
                                                        <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 

diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 99678abdda93044bf1b41f5499a41c51fc044a39..5c990cfae254e43c46b80e994bccd7bcc604d1ef 100644 (file)
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -183,7 +183,7 @@
                                usart0 {
                                        pinctrl_usart0: usart0-0 {
                                                atmel,pins =
-                                                       <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -201,7 +201,7 @@
                                usart1 {
                                        pinctrl_usart1: usart1-0 {
                                                atmel,pins =
-                                                       <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -219,7 +219,7 @@
                                usart2 {
                                        pinctrl_usart2: usart2-0 {
                                                atmel,pins =
-                                                       <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 691c95ea61754d7bef410c4aa954b9d836442a81..fd179097a4bfd350cca40c9d494cdda0b3d45dde 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -556,7 +556,7 @@
                                usart0 {
                                        pinctrl_usart0: usart0-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -574,7 +574,7 @@
                                usart1 {
                                        pinctrl_usart1: usart1-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -592,7 +592,7 @@
                                usart2 {
                                        pinctrl_usart2: usart2-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -610,7 +610,7 @@
                                usart3 {
                                        pinctrl_usart3: usart3-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+                                                       <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
                                                         AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 

diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 8643b7151565044db4c38ee74928fcf94de09e25..ea024e4b6e0956347414420250e579653ca97998 100644 (file)
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -682,7 +682,7 @@
                                usart0 {
                                        pinctrl_usart0: usart0-0 {
                                                atmel,pins =
-                                                       <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+                                                       <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
                                                        <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -721,7 +721,7 @@
                                usart1 {
                                        pinctrl_usart1: usart1-0 {
                                                atmel,pins =
-                                                       <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+                                                       <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
                                                        <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -744,7 +744,7 @@
                                usart2 {
                                        pinctrl_usart2: usart2-0 {
                                                atmel,pins =
-                                                       <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+                                                       <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
                                                        <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };
 
@@ -767,7 +767,7 @@
                                usart3 {
                                        pinctrl_usart3: usart3-0 {
                                                atmel,pins =
-                                                       <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+                                                       <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
                                                        <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
                                        };