arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2

The Devicetree specification expects device node names to have a generic
name, representing the class of a device.  Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201027170947.132725-11-krzk@kernel.org

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 829fea23d4ab174bb81df1a4f0b4735b9bd7cadf..01ab886fd3e9b1eb3a31eabde4c6d8da79680450 100644 (file)
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -94,7 +94,7 @@
                #size-cells = <0>;
                status = "okay";
 
-               max98504: max98504@31 {
+               max98504: amplifier@31 {
                        compatible = "maxim,max98504";
                        reg = <0x31>;
                        maxim,rx-path = <1>;
@@ -386,7 +386,7 @@
        status = "okay";
        clock-frequency = <2500000>;
 
-       s2mps13-pmic@66 {
+       pmic@66 {
                compatible = "samsung,s2mps13-pmic";
                interrupt-parent = <&gpa0>;
                interrupts = <7 IRQ_TYPE_NONE>;
@@ -817,7 +817,7 @@
        status = "okay";
        clock-frequency = <1000000>;
 
-       sii8620@39 {
+       bridge@39 {
                reg = <0x39>;
                compatible = "sil,sii8620";
                cvcc10-supply = <&ldo36_reg>;
@@ -852,7 +852,7 @@
 &hsi2c_8 {
        status = "okay";
 
-       max77843@66 {
+       pmic@66 {
                compatible = "maxim,max77843";
                interrupt-parent = <&gpa1>;
                interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
@@ -1231,7 +1231,7 @@
        cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 
-       wm5110: wm5110-codec@0 {
+       wm5110: audio-codec@0 {
                compatible = "wlf,wm5110";
                reg = <0x0>;
                spi-max-frequency = <20000000>;