net: dsa: mt7530: set PLL frequency and trgmii only when trgmii is used

[ Upstream commit 0b086d76e7b011772b0ac214c6e5fd5816eff2df ]

As my testing on the MCM MT7530 switch on MT7621 SoC shows, setting the PLL
frequency does not affect MII modes other than trgmii on port 5 and port 6.
So the assumption is that the operation here called "setting the PLL
frequency" actually sets the frequency of the TRGMII TX clock.

Make it so that it and the rest of the trgmii setup run only when the
trgmii mode is used.

Tested rgmii and trgmii modes of port 6 on MCM MT7530 on MT7621AT Unielec
U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230310073338.5836-2-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 22a09a11d8749c6eda46ec9d227fede187a5050c..793992c378559a071016248ae48e3fe7e560cb0c 100644 (file)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -425,8 +425,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
        switch (interface) {
        case PHY_INTERFACE_MODE_RGMII:
                trgint = 0;
-               /* PLL frequency: 125MHz */
-               ncpo1 = 0x0c80;
                break;
        case PHY_INTERFACE_MODE_TRGMII:
                trgint = 1;
@@ -457,38 +455,40 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
        mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
                   P6_INTF_MODE(trgint));
 
-       /* Lower Tx Driving for TRGMII path */
-       for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
-               mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
-                            TD_DM_DRVP(8) | TD_DM_DRVN(8));
-
-       /* Disable MT7530 core and TRGMII Tx clocks */
-       core_clear(priv, CORE_TRGMII_GSW_CLK_CG,
-                  REG_GSWCK_EN | REG_TRGMIICK_EN);
-
-       /* Setup the MT7530 TRGMII Tx Clock */
-       core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
-       core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
-       core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
-       core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
-       core_write(priv, CORE_PLL_GROUP4,
-                  RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
-                  RG_SYSPLL_BIAS_LPF_EN);
-       core_write(priv, CORE_PLL_GROUP2,
-                  RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
-                  RG_SYSPLL_POSDIV(1));
-       core_write(priv, CORE_PLL_GROUP7,
-                  RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
-                  RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
-
-       /* Enable MT7530 core and TRGMII Tx clocks */
-       core_set(priv, CORE_TRGMII_GSW_CLK_CG,
-                REG_GSWCK_EN | REG_TRGMIICK_EN);
-
-       if (!trgint)
+       if (trgint) {
+               /* Lower Tx Driving for TRGMII path */
+               for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
+                       mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
+                                    TD_DM_DRVP(8) | TD_DM_DRVN(8));
+
+               /* Disable MT7530 core and TRGMII Tx clocks */
+               core_clear(priv, CORE_TRGMII_GSW_CLK_CG,
+                          REG_GSWCK_EN | REG_TRGMIICK_EN);
+
+               /* Setup the MT7530 TRGMII Tx Clock */
+               core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
+               core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
+               core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
+               core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
+               core_write(priv, CORE_PLL_GROUP4,
+                          RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
+                          RG_SYSPLL_BIAS_LPF_EN);
+               core_write(priv, CORE_PLL_GROUP2,
+                          RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
+                          RG_SYSPLL_POSDIV(1));
+               core_write(priv, CORE_PLL_GROUP7,
+                          RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
+                          RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
+
+               /* Enable MT7530 core and TRGMII Tx clocks */
+               core_set(priv, CORE_TRGMII_GSW_CLK_CG,
+                        REG_GSWCK_EN | REG_TRGMIICK_EN);
+       } else {
                for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
                        mt7530_rmw(priv, MT7530_TRGMII_RD(i),
                                   RD_TAP_MASK, RD_TAP(16));
+       }
+
        return 0;
 }