regulator: max77503: Add ADI MAX77503 support

Add ADI MAX77503 buck converter driver support.

Signed-off-by: Gokhan Celik <gokhan.celik@analog.com>
Link: https://lore.kernel.org/r/10bb3894fea31a098d768e346c8721e730d7cb21.1698000185.git.gokhan.celik@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 965d4f0c18a6c0bfaff78fd4a8e7b31cb099bd03..f3ec246913784643b1f435122b95bde598113ff1 100644 (file)
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -564,6 +564,16 @@ config REGULATOR_MAX5970
          The MAX5970/5978 is a smart switch with no output regulation, but
          fault protection and voltage and current monitoring capabilities.
 
+config REGULATOR_MAX77503
+       tristate "Analog Devices MAX77503 Regulator"
+       depends on I2C
+       select REGMAP_I2C
+       help
+         This driver controls a Analog Devices MAX77503 14V input, 1.5A
+         high-efficiency buck converter via I2C bus.
+         Say M here if you want to include support for the regulator as a
+         module.
+
 config REGULATOR_MAX77541
        tristate "Analog Devices MAX77541/77540 Regulator"
        depends on MFD_MAX77541

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 23074714a81a3e8910c53f52e7b73a0f5604059a..b2b059b5ee565a31ba5c3bd27aa51cc4b77523e1 100644 (file)
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
 obj-$(CONFIG_REGULATOR_MAX5970) += max5970-regulator.o
+obj-$(CONFIG_REGULATOR_MAX77503) += max77503-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77541) += max77541-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
 obj-$(CONFIG_REGULATOR_MAX77650) += max77650-regulator.o

diff --git a/drivers/regulator/max77503-regulator.c b/drivers/regulator/max77503-regulator.c
new file mode 100644 (file)
index 0000000..4a6ba4d
--- /dev/null
+++ b/drivers/regulator/max77503-regulator.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Analog Devices, Inc.
+ * ADI regulator driver for MAX77503.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/util_macros.h>
+
+#define MAX77503_REG_CFG                       0x00
+#define MAX77503_REG_VOUT                      0x01
+
+#define MAX77503_BIT_EN                                BIT(0)
+#define MAX77503_BIT_CURR_LIM          BIT(3)
+#define MAX77503_BIT_ADEN                      BIT(6)
+
+#define MAX77503_BITS_SOFT_START       GENMASK(5, 4)
+#define MAX77503_BITS_MX_VOUT          GENMASK(7, 0)
+
+#define MAX77503_AD_ENABLED                    0x1
+#define MAX77503_AD_DISABLED           0x0
+
+struct max77503_dev {
+       struct device *dev;
+       struct device_node *of_node;
+       struct regulator_desc desc;
+       struct regulator_dev *rdev;
+       struct regmap *regmap;
+};
+
+static const struct regmap_config max77503_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .max_register = 0x2,
+};
+
+static const struct regulator_ops max77503_buck_ops = {
+       .list_voltage = regulator_list_voltage_linear_range,
+       .map_voltage = regulator_map_voltage_ascend,
+       .is_enabled = regulator_is_enabled_regmap,
+       .enable = regulator_enable_regmap,
+       .disable = regulator_disable_regmap,
+       .get_voltage_sel = regulator_get_voltage_sel_regmap,
+       .set_voltage_sel = regulator_set_voltage_sel_regmap,
+       .get_current_limit = regulator_get_current_limit_regmap,
+       .set_current_limit = regulator_set_current_limit_regmap,
+       .set_active_discharge = regulator_set_active_discharge_regmap,
+       .set_soft_start = regulator_set_soft_start_regmap,
+};
+
+static const struct linear_range max77503_buck_ranges[] = {
+       REGULATOR_LINEAR_RANGE(800000, 0x00, 0x54, 50000)
+};
+
+static const unsigned int max77503_current_limit_table[] = {
+       500000, 2000000
+};
+
+static const struct regulator_desc max77503_regulators_desc = {
+       .name = "max77503",
+       .enable_reg = MAX77503_REG_CFG,
+       .enable_mask = MAX77503_BIT_EN,
+       .ops = &max77503_buck_ops,
+       .type = REGULATOR_VOLTAGE,
+       .linear_ranges = max77503_buck_ranges,
+       .n_linear_ranges = ARRAY_SIZE(max77503_buck_ranges),
+       .vsel_reg = MAX77503_REG_VOUT,
+       .vsel_mask = MAX77503_BITS_MX_VOUT,
+       .soft_start_reg = MAX77503_REG_CFG,
+       .soft_start_mask = MAX77503_BITS_SOFT_START,
+       .active_discharge_reg = MAX77503_REG_CFG,
+       .active_discharge_mask = MAX77503_BIT_ADEN,
+       .active_discharge_off = MAX77503_AD_DISABLED,
+       .active_discharge_on = MAX77503_AD_ENABLED,
+       .csel_reg = MAX77503_REG_CFG,
+       .csel_mask = MAX77503_BIT_CURR_LIM,
+       .curr_table = max77503_current_limit_table,
+       .n_current_limits = ARRAY_SIZE(max77503_current_limit_table),
+       .owner = THIS_MODULE,
+};
+
+static int max77503_regulator_probe(struct i2c_client *client)
+{
+       struct device *dev = &client->dev;
+       struct regulator_config config = {};
+       struct regulator_dev *rdev;
+
+       config.dev = dev;
+       config.of_node = dev->of_node;
+       config.regmap = devm_regmap_init_i2c(client, &max77503_regmap_config);
+       if (IS_ERR(config.regmap)) {
+               dev_err(dev, "Failed to init regmap");
+               return PTR_ERR(config.regmap);
+       }
+
+       rdev = devm_regulator_register(dev, &max77503_regulators_desc, &config);
+       if (IS_ERR(rdev)) {
+               dev_err(dev, "Failed to register regulator MAX77503");
+               return PTR_ERR(rdev);
+       }
+
+       return 0;
+}
+
+static const struct of_device_id of_max77503_match_tbl[] = {
+       { .compatible = "adi,max77503", },
+       { }
+};
+
+MODULE_DEVICE_TABLE(of, of_max77503_match_tbl);
+
+static const struct i2c_device_id max77503_regulator_id[] = {
+       {"max77503"},
+       { }
+};
+
+MODULE_DEVICE_TABLE(i2c, max77503_regulator_id);
+
+static struct i2c_driver max77503_regulator_driver = {
+       .driver = {
+               .name = "max77503",
+               .of_match_table = of_max77503_match_tbl
+       },
+       .probe = max77503_regulator_probe,
+       .id_table = max77503_regulator_id,
+};
+
+module_i2c_driver(max77503_regulator_driver);
+
+MODULE_AUTHOR("Gokhan Celik <Gokhan.Celik@analog.com>");
+MODULE_DESCRIPTION("MAX77503 regulator driver");
+MODULE_LICENSE("GPL");