ARM: dts: sunxi: Remove pinctrl groups setting bias

So far we've enabled pull-up and pull-down resistors on GPIOs using a
pinctrl node. Now that the GPIO binding allows for a flag to declare this,
let's switch to it.

This brings us closer to removing all the GPIO pinctrl nodes, which will in
turn allow us to switch the pinctrl strict mode on.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 66555e437ce4f1fe85e2bc4a4d1115d060f1bea3..74262988881c6aa0fff5a0564e86d9da231c3d99 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -131,20 +131,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-};
-
 &reg_usb0_vbus {
        status = "okay";
 };
@@ -165,10 +151,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index d5eb2a151b893ee62b7f2e92ebfceed6eec3c117..7306c65df88aa1acff7bb9446e38d776b67c21ea 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -184,12 +184,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
 };
 
 &reg_ahci_5v {
@@ -254,9 +248,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
index f7af24cb66e76273c036ef0e13cf6a9c1e491478..8ee3ff42bd553814b4f31550294ae5cc16972a9e 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -158,20 +158,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-};
-
 &pwm {
        pinctrl-names = "default";
        pinctrl-0 = <&pwm0_pin>;
@@ -223,10 +209,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 0cf752a990b9eed9b6148cf31809ea49425043a7..bf2044bac42fb9870c0603a89de88ee08e795677 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -86,20 +86,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-};
-
 &reg_usb0_vbus {
        status = "okay";
 };
@@ -121,10 +107,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index 2e5c452ca9c6d7392bd41b3c939bbeda0ff99a24..ca878384e9027c94712beeb556a875707f22a36d 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -164,20 +164,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-};
-
 &pwm {
        pinctrl-names = "default";
        pinctrl-0 = <&pwm0_pin>;
@@ -233,10 +219,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;

diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index c1ff846cb442e8f60133b0567b3893096ff65ddc..76016f2ca29daab81342102f32db82b33980a32d 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -150,20 +150,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-};
-
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -209,10 +195,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 31ba7b93df51c8e3e67061b0f1f7565c6e6af573..0a562b2cc5bc6771c65ed77c2c72d2f76c87bd55 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -61,8 +61,6 @@
 
        gpio-keys {
                compatible = "gpio-keys-polled";
-               pinctrl-names = "default";
-               pinctrl-0 = <&key_pins_inet9f>;
                poll-interval = <20>;
 
                left-joystick-left {
@@ -70,7 +68,7 @@
                        linux,code = <ABS_X>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <0xffffffff>; /* -1 */
-                       gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+                       gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
                };
 
                left-joystick-right {
@@ -78,7 +76,7 @@
                        linux,code = <ABS_X>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <1>;
-                       gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+                       gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
                };
 
                left-joystick-up {
@@ -86,7 +84,7 @@
                        linux,code = <ABS_Y>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <0xffffffff>; /* -1 */
-                       gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+                       gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
                };
 
                left-joystick-down {
@@ -94,7 +92,7 @@
                        linux,code = <ABS_Y>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <1>;
-                       gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+                       gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
                };
 
                right-joystick-left {
@@ -102,7 +100,7 @@
                        linux,code = <ABS_Z>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <0xffffffff>; /* -1 */
-                       gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+                       gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
                };
 
                right-joystick-right {
@@ -110,7 +108,7 @@
                        linux,code = <ABS_Z>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <1>;
-                       gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+                       gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
                };
 
                right-joystick-up {
@@ -118,7 +116,7 @@
                        linux,code = <ABS_RZ>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <0xffffffff>; /* -1 */
-                       gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+                       gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
                };
 
                right-joystick-down {
@@ -126,7 +124,7 @@
                        linux,code = <ABS_RZ>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <1>;
-                       gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+                       gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
                };
 
                dpad-left {
@@ -134,7 +132,7 @@
                        linux,code = <ABS_HAT0X>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <0xffffffff>; /* -1 */
-                       gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+                       gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
                };
 
                dpad-right {
@@ -142,7 +140,7 @@
                        linux,code = <ABS_HAT0X>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <1>;
-                       gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+                       gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
                };
 
                dpad-up {
@@ -150,7 +148,7 @@
                        linux,code = <ABS_HAT0Y>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <0xffffffff>; /* -1 */
-                       gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+                       gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
                };
 
                dpad-down {
@@ -158,55 +156,55 @@
                        linux,code = <ABS_HAT0Y>;
                        linux,input-type = <EV_ABS>;
                        linux,input-value = <1>;
-                       gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+                       gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
                };
 
                x {
                        label = "Button X";
                        linux,code = <BTN_X>;
-                       gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+                       gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
                };
 
                y {
                        label = "Button Y";
                        linux,code = <BTN_Y>;
-                       gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+                       gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
                };
 
                a {
                        label = "Button A";
                        linux,code = <BTN_A>;
-                       gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+                       gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
                };
 
                b {
                        label = "Button B";
                        linux,code = <BTN_B>;
-                       gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+                       gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
                };
 
                select {
                        label = "Select Button";
                        linux,code = <BTN_SELECT>;
-                       gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+                       gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
                };
 
                start {
                        label = "Start Button";
                        linux,code = <BTN_START>;
-                       gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+                       gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
                };
 
                top-left {
                        label = "Top Left Button";
                        linux,code = <BTN_TL>;
-                       gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+                       gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
                };
 
                top-right {
                        label = "Top Right Button";
                        linux,code = <BTN_TR>;
-                       gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+                       gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
                };
        };
 };
@@ -306,30 +304,6 @@
        status = "okay";
 };
 
-&pio {
-       key_pins_inet9f: key-pins {
-               pins = "PA0", "PA1", "PA3", "PA4",
-                      "PA5", "PA6", "PA8", "PA9",
-                      "PA11", "PA12", "PA13",
-                      "PA14", "PA15", "PA16", "PA17",
-                      "PH22", "PH23", "PH24", "PH25", "PH26";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-};
-
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -375,10 +349,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index cb94e083ea3b2932eb78d3fd04279899945b4fc8..58ad2ad9041f19d683b280efd6dd722b7a634603 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -148,14 +148,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_usb1_vbus {
        status = "okay";
 };
@@ -183,9 +175,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 4cbc58363cafa74e98a53abe33a721663ac49281..7c1f379c3aede6a86b1c0e01bbdccef01f5c731d 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -186,18 +186,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
 };
 
 &reg_ahci_5v {
@@ -229,10 +217,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpio   = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
        usb0_vbus-supply   = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;

diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 08f3e385fe6327cbd39e42412c63d3cb9ee93a31..0f1e781069e9d14491fd8236fa4b8959d2da6e2c 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -154,14 +154,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -201,9 +193,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
        usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
        status = "okay";

diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index cd516543a9e5def64a716a0eea76376dbf4bf910..bcb2fc0c56b16bcf304ce9240bc351f987782bfd 100644 (file)
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -146,20 +146,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-};
-
 &pwm {
        pinctrl-names = "default";
        pinctrl-0 = <&pwm0_pin>;
@@ -212,9 +198,8 @@
 
 &usbphy {
        pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index 6d7a2f4bd05c5041fe544971442580fe95af3971..8af0eae2ddc195a90d5820ffd7b61ea5ad69b879 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -119,12 +119,6 @@
 };
 
 &pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PG12";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
        led_pins_t004: led-pin {
                pins = "PB2";
                function = "gpio_out";
@@ -149,9 +143,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+       usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";
 };

diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 430caf873fe27d90469323f73b8548be481cb9c8..5340b4164df26e622e12bf412f09aacc4c1003f1 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -218,12 +218,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PG12";
-               function = "gpio_in";
-               bias-pull-up;
-       };
 };
 
 &reg_usb0_vbus {
@@ -271,9 +265,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+       usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
index ac3b2221cdef9e7b7cf12d096fc81ef393514187..a23bf24792ec53cf1dda5f55c79fd95f8ab398cf 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -127,20 +127,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PG1";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PG2";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &pwm {
        pinctrl-names = "default";
        pinctrl-0 = <&pwm0_pin>;
@@ -195,10 +181,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-       usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+       usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_ldo3>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 9369f7453beb870089d830282e859741881df114..9b9f2a57485150274983d4a4be8a4f4786b0e421 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -124,14 +124,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PG2";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -182,9 +174,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+       usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
        usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_ldo3>;

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index f8dc4bbf249c85326a1e4dbd4e9619e94aa3a3ad..5df398d7723884777e20eb5892f1f081ed8af3fe 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -109,18 +109,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PG2";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PG1";
-               function = "gpio_in";
-               bias-pull-down;
-       };
 };
 
 &reg_usb0_vbus {
@@ -145,10 +133,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-       usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+       usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index e49596c721a9af051235e2f5a74a09c80464b3f1..39101228a7556a1996d2ac0cafd20712032ab2ef 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -202,18 +202,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PG2";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PG1";
-               function = "gpio_in";
-               bias-pull-down;
-       };
 };
 
 &reg_usb0_vbus {
@@ -251,10 +239,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-       usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+       usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index 379d530ea2a76cd60230b0e9839746d3708da1d6..be486d28d04faeb4cfe98306bdb3cf25475e8963 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -61,10 +61,8 @@
        i2c_lcd: i2c {
                /* The lcd panel i2c interface is hooked up via gpios */
                compatible = "i2c-gpio";
-               pinctrl-names = "default";
-               pinctrl-0 = <&i2c_lcd_pins>;
-               sda-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-               scl-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+               sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
+               scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
                i2c-gpio,delay-us = <5>;
        };
 };
@@ -94,14 +92,6 @@
        };
 };
 
-&pio {
-       i2c_lcd_pins: i2c-lcd-pin {
-               pins = "PG10", "PG12";
-               function = "gpio_out";
-               bias-pull-up;
-       };
-};
-
 &reg_usb0_vbus {
        gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 };

diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index de5e67497f20af533e624467e295d2eef64f72ef..4bf4943d4eb77c923ca25b57ecb678b5eb347bc7 100644 (file)
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -84,9 +84,7 @@
 
        onewire {
                compatible = "w1-gpio";
-               gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
-               pinctrl-names = "default";
-               pinctrl-0 = <&chip_w1_pin>;
+               gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
        };
 };
 
@@ -173,14 +171,6 @@
        status = "okay";
 };
 
-&pio {
-       chip_w1_pin: chip-w1-pin {
-               pins = "PD2";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_dcdc2 {
        regulator-min-microvolt = <1000000>;
        regulator-max-microvolt = <1400000>;

diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index cf33ad09ef1e0d9b86475f8215ce981fad4f9634..1a9926d714108db5baa546ccb8851cbeb3c16537 100644 (file)
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -132,20 +132,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PG1";
-               function = "gpio_in";
-               bias-pull-down;
-       };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PG2";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -198,10 +184,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-       usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+       usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_ldo3>;

diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 0e62b404210070de5b806476553825c537442d5c..c3d56dc93513f58bcfa2fbaa31da6fc5616084ae 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -63,10 +63,8 @@
        i2c_lcd: i2c {
                /* The lcd panel i2c interface is hooked up via gpios */
                compatible = "i2c-gpio";
-               pinctrl-names = "default";
-               pinctrl-0 = <&i2c_lcd_pins>;
-               sda-gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>; /* PA23 */
-               scl-gpios = <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24 */
+               sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
+               scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
                i2c-gpio,delay-us = <5>;
        };
 };
@@ -113,14 +111,6 @@
        status = "okay";
 };
 
-&pio {
-       i2c_lcd_pins: i2c-lcd-pins {
-               pins = "PA23", "PA24";
-               function = "gpio_out";
-               bias-pull-up;
-       };
-};
-
 &reg_usb2_vbus {
        gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index 1ebc042f5e6c895525d0a9e61eae1bd764e3d4c2..7de2abd541c12f84a493c1f095ef97afad0290c3 100644 (file)
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -73,14 +73,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PA15";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &p2wi {
        status = "okay";
 
@@ -173,9 +165,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+       usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_drivevbus>;
        usb1_vbus-supply = <&reg_dldo1>;

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 76252455d4852e5ae9bb0c842c298478ee367892..4df921632f7a17dd4781222d0d9a2d2505100522 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -246,12 +246,6 @@
                        "SPI-MISO", "SPI-CE1", "",
                "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
                "", "", "", "", "", "", "", "";
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
 };
 
 #include "axp209.dtsi"
@@ -329,9 +323,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 365ac2b9bcdf9985e0bff6a25e9b170af8b22af3..08e5a5abf8cce46c1627ac5ef93e9b365f448bb8 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -173,14 +173,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_ahci_5v {
        status = "okay";
 };
@@ -236,9 +228,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 0a87a45787ae3d54af30e5dccf58f863a30a69e7..3e170cfac86aeab3cc805c7468d8748244aa723d 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -229,14 +229,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 #include "axp209.dtsi"
 
 &ac_power_supply {
@@ -322,9 +314,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index fafe01ee5ea0f4b07003f54c66dda475b747eeb0..e40dd47df8ce350f67016e1d18575879fe1b5840 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -174,18 +174,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
 };
 
 &reg_ahci_5v {
@@ -217,10 +205,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index bdf894c054db5f667ba1dc45b5e359e0c146b1e5..95c6f8949076842882ebafd9ad0aad0cdfb92383 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -185,18 +185,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
 };
 
 &reg_ahci_5v {
@@ -273,10 +261,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index ba18e14fa229c5a080713ffb4559627f0629121e..0dcba070444af0e577afc0165e800d15c15a02ea 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -252,18 +252,6 @@
                function = "gpio_out";
                drive-strength = <20>;
        };
-
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-
-       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
-               pins = "PH5";
-               function = "gpio_in";
-               bias-pull-down;
-       };
 };
 
 #include "axp209.dtsi"
@@ -355,10 +343,8 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 872f6f35d40d5e0bddad306cb1cabd2d7173ae56..9628041bb3a3275a3af62d3f9c620e6d65311b50 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -176,14 +176,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -239,9 +231,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 93fa89b84a8885465dea1fe93d31f7cd2d577867..7b3532665c2886a1516fadf84af0b5101c7b14a7 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -135,14 +135,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -198,9 +190,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index 24781f5c231ebce1d91bb009473223e1c82574c2..173b676436e906f348aa005ec8295adb2035243f 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -168,14 +168,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_ahci_5v {
        gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
        status = "okay";
@@ -226,9 +218,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb1_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 606630ac5f3acda6aa13d5246e879631c9b3ea78..14a88aa16a97a26fd461b1aef590864d6ce45709 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -168,14 +168,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_ahci_5v {
        gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
        status = "okay";
@@ -226,9 +218,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";

diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 80ead52db2704c7c1e45ef06148abc7b83384176..6a66b0432dfa8dfcd9bb1e276919a5896c6d65ae 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -156,14 +156,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &pwm {
        pinctrl-names = "default";
        pinctrl-0 = <&pwm0_pin>;
@@ -223,9 +215,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;

diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index 57a4d6a5d163dbf9f79ccac404d21371adc752c9..f8475a39777bf131f286f6245847aa35c891b63c 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -145,14 +145,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH4";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &reg_dcdc2 {
        regulator-always-on;
        regulator-min-microvolt = <1000000>;
@@ -206,9 +198,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;

diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
index 316998e9ec5d94e77a34f5333204c94190bf0925..4f48eec6b2efe617f28b6d9ef0f73da2a39b15f0 100644 (file)
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -158,14 +158,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_det: usb0-id-detect-pin {
-               pins = "PD10";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &r_rsb {
        status = "okay";
 
@@ -314,10 +306,8 @@
 
 &usbphy {
        status = "okay";
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_det>;
        usb0_vbus-supply = <&reg_drivevbus>;
-       usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */
+       usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
 };

diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index c773ddf45e66e913d6f1bbbb7c7849cba05186b6..b3d8b8f056cdf1ca6f1cd7b67555d9a24c47c8fc 100644 (file)
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -86,14 +86,6 @@
        status = "okay";
 };
 
-&pio {
-       usb0_id_detect_pin: usb0-id-detect-pin {
-               pins = "PH8";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &r_rsb {
        status = "okay";
 
@@ -224,9 +216,7 @@
 };
 
 &usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+       usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */
        usb0_vbus_power-supply = <&usb_power_supply>;
        usb0_vbus-supply = <&reg_drivevbus>;
        status = "okay";