ARM: dts: lan966x: Add interrupt support for PHYs on pcb8290

Add interrupt support for the PHYs found on pcb8290. They are all
sharing the same interrupt line towards lan966x.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220915064112.1935051-1-horatiu.vultur@microchip.com

diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
index 77187f59f04df1f3fcd4ac22e07dc19e6101e47b..8804e8ba537055a47a452e3842e12febda8b8509 100644 (file)
--- a/arch/arm/boot/dts/lan966x-pcb8290.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -58,41 +58,57 @@
 
        ext_phy0: ethernet-phy@7 {
                reg = <7>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 
        ext_phy1: ethernet-phy@8 {
                reg = <8>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 
        ext_phy2: ethernet-phy@9 {
                reg = <9>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 
        ext_phy3: ethernet-phy@10 {
                reg = <10>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 
        ext_phy4: ethernet-phy@15 {
                reg = <15>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 
        ext_phy5: ethernet-phy@16 {
                reg = <16>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 
        ext_phy6: ethernet-phy@17 {
                reg = <17>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 
        ext_phy7: ethernet-phy@18 {
                reg = <18>;
+               interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-parent = <&gpio>;
                coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
        };
 };