config NET_SB1000
tristate "General Instruments Surfboard 1000"
- depends on PNP
+ depends on ISA && PNP
help
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
#
menuconfig ARCNET
- depends on NETDEVICES && (ISA || PCI || PCMCIA)
+ depends on NETDEVICES && (ISA || PCI || PCMCIA) && HAS_IOPORT
tristate "ARCnet support"
help
If you have a network card of this type, say Y and check out the
config CAN_CC770_ISA
tristate "ISA Bus based legacy CC770 driver"
+ depends on ISA
help
This driver adds legacy support for CC770 and AN82527 chips
connected to the ISA bus using I/O port, memory mapped or
config CAN_SJA1000_ISA
tristate "ISA Bus based legacy SJA1000 driver"
+ depends on ISA
help
This driver adds legacy support for SJA1000 chips connected to
the ISA bus using I/O port, memory mapped or indirect access.
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
config NE2K_PCI
tristate "PCI NE2000 and clones support (see help)"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
help
This driver is for NE2000 compatible PCI cards. It will not work
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
config PCNET32
tristate "AMD PCnet32 PCI support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
config E1000
tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
help
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
adapters. For more information on how to identify your adapter, go
config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select CRC32
select MII
help
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
select CRC32
select MII
help
config TLAN
tristate "TI ThunderLAN support"
- depends on (PCI || EISA)
+ depends on (PCI || EISA) && HAS_IOPORT
help
If you have a PCI Ethernet network card based on the ThunderLAN chip
which is supported by this driver, say Y here.
tristate "VIA Rhine support"
depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP)
depends on PCI || ARCH_VT8500 || COMPILE_TEST
+ depends on HAS_IOPORT
depends on HAS_DMA
select CRC32
select MII
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
- depends on PCMCIA
+ depends on PCMCIA && HAS_IOPORT
help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
#define DFX_BUS_TC(dev) 0
#endif
-#if defined(CONFIG_EISA) || defined(CONFIG_PCI)
+#ifdef CONFIG_HAS_IOPORT
#define dfx_use_mmio bp->mmio
#else
#define dfx_use_mmio true
config BAYCOM_SER_FDX
tristate "BAYCOM ser12 fullduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
config BAYCOM_SER_HDX
tristate "BAYCOM ser12 halfduplex driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
select CRC_CCITT
help
This is one of two drivers for Baycom style simple amateur radio
config YAM
tristate "YAM driver for AX.25"
- depends on AX25 && !S390
+ depends on AX25 && HAS_IOPORT
help
The YAM is a modem for packet radio which connects to the serial
port and includes some of the functions of a Terminal Node
config FARSYNC
tristate "FarSync T-Series support"
- depends on HDLC && PCI
+ depends on HDLC && PCI && HAS_IOPORT
help
Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
FarSite Communications Ltd.
#
menuconfig HAMRADIO
- depends on NET && !S390
+ depends on NET
bool "Amateur Radio support"
help
If you want to connect your Linux box to an amateur radio, answer Y