bool
default y
-config ALPHA_EV4
- bool
-
-config ALPHA_EV5
- bool
- default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
config ALPHA_CIA
bool
depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
default y
config ALPHA_EV56
- bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
- default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
- prompt "EV56 CPU (speed >= 333MHz)?"
- depends on ALPHA_NORITAKE || ALPHA_MIKASA
-
-config ALPHA_EV56
- prompt "EV56 CPU (speed >= 400MHz)?"
- depends on ALPHA_RAWHIDE
+ bool
+ default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE
config ALPHA_T2
bool
config ALPHA_WTINT
bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
default y if ALPHA_QEMU
- default n if ALPHA_EV5 || ALPHA_EV56
+ default n if ALPHA_EV56
default n if !ALPHA_SRM && !ALPHA_GENERIC
default y if SMP
help
cflags-y := -pipe -mno-fp-regs -ffixed-8
cflags-y += $(call cc-option, -fno-jump-tables)
-cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5
cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56
cpuflags-$(CONFIG_ALPHA_POLARIS) := -mcpu=pca56
cpuflags-$(CONFIG_ALPHA_SX164) := -mcpu=pca56
cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6
cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67
# If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default. Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC) := -mcpu=ev5
+# the host compiler might have on by default.
+cpuflags-$(CONFIG_ALPHA_GENERIC) := -mcpu=ev56 -mtune=ev6
cflags-y += $(cpuflags-y)
#define ELF_PLATFORM \
({ \
enum implver_enum i_ = implver(); \
- ( i_ == IMPLVER_EV4 ? "ev4" \
- : i_ == IMPLVER_EV5 \
- ? (amask(AMASK_BWX) ? "ev5" : "ev56") \
+ ( i_ == IMPLVER_EV5 ? "ev56" \
: amask (AMASK_CIX) ? "ev6" : "ev67"); \
})
int (*mv_is_ioaddr)(unsigned long);
int (*mv_is_mmio)(const volatile void __iomem *);
- void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
- struct task_struct *);
- void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
-
- void (*mv_flush_tlb_current)(struct mm_struct *);
- void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
- struct vm_area_struct *vma,
- unsigned long addr);
-
void (*update_irq_hw)(unsigned long, unsigned long, int);
void (*ack_irq)(unsigned long);
void (*device_interrupt)(unsigned long vector);
#ifdef CONFIG_ALPHA_GENERIC
# define MAX_ASN (alpha_mv.max_asn)
#else
-# ifdef CONFIG_ALPHA_EV4
-# define MAX_ASN EV4_MAX_ASN
-# elif defined(CONFIG_ALPHA_EV5)
+# if defined(CONFIG_ALPHA_EV56)
# define MAX_ASN EV5_MAX_ASN
# else
# define MAX_ASN EV6_MAX_ASN
task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
}
-__EXTERN_INLINE void
-ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
- struct task_struct *next)
-{
- /* As described, ASN's are broken for TLB usage. But we can
- optimize for switching between threads -- if the mm is
- unchanged from current we needn't flush. */
- /* ??? May not be needed because EV4 PALcode recognizes that
- ASN's are broken and does a tbiap itself on swpctx, under
- the "Must set ASN or flush" rule. At least this is true
- for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
- I'm going to leave this here anyway, just to Be Sure. -- r~ */
- if (prev_mm != next_mm)
- tbiap();
-
- /* Do continue to allocate ASNs, because we can still use them
- to avoid flushing the icache. */
- ev5_switch_mm(prev_mm, next_mm, next);
-}
-
extern void __load_new_mm_context(struct mm_struct *);
asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
long cause, struct pt_regs *regs);
__load_new_mm_context(next_mm);
}
-__EXTERN_INLINE void
-ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
- __load_new_mm_context(next_mm);
- tbiap();
-}
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define switch_mm(a,b,c) alpha_mv.mv_switch_mm((a),(b),(c))
-# define activate_mm(x,y) alpha_mv.mv_activate_mm((x),(y))
-#else
-# ifdef CONFIG_ALPHA_EV4
-# define switch_mm(a,b,c) ev4_switch_mm((a),(b),(c))
-# define activate_mm(x,y) ev4_activate_mm((x),(y))
-# else
-# define switch_mm(a,b,c) ev5_switch_mm((a),(b),(c))
-# define activate_mm(x,y) ev5_activate_mm((x),(y))
-# endif
-#endif
+#define switch_mm(a,b,c) ev5_switch_mm((a),(b),(c))
+#define activate_mm(x,y) ev5_activate_mm((x),(y))
#define init_new_context init_new_context
static inline int
(enum implver_enum) __implver; })
#else
/* Try to eliminate some dead code. */
-#ifdef CONFIG_ALPHA_EV4
-#define implver() IMPLVER_EV4
-#endif
-#ifdef CONFIG_ALPHA_EV5
+#ifdef CONFIG_ALPHA_EV56
#define implver() IMPLVER_EV5
#endif
#if defined(CONFIG_ALPHA_EV6)
extern void __load_new_mm_context(struct mm_struct *);
-/* Use a few helper functions to hide the ugly broken ASN
- numbers on early Alphas (ev4 and ev45). */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current(struct mm_struct *mm)
-{
- __load_new_mm_context(mm);
- tbiap();
-}
-
__EXTERN_INLINE void
ev5_flush_tlb_current(struct mm_struct *mm)
{
careful about the icache here, there is no way to invalidate a
specific icache page. */
-__EXTERN_INLINE void
-ev4_flush_tlb_current_page(struct mm_struct * mm,
- struct vm_area_struct *vma,
- unsigned long addr)
-{
- int tbi_flag = 2;
- if (vma->vm_flags & VM_EXEC) {
- __load_new_mm_context(mm);
- tbi_flag = 3;
- }
- tbi(tbi_flag, addr);
-}
-
__EXTERN_INLINE void
ev5_flush_tlb_current_page(struct mm_struct * mm,
struct vm_area_struct *vma,
}
-#ifdef CONFIG_ALPHA_GENERIC
-# define flush_tlb_current alpha_mv.mv_flush_tlb_current
-# define flush_tlb_current_page alpha_mv.mv_flush_tlb_current_page
-#else
-# ifdef CONFIG_ALPHA_EV4
-# define flush_tlb_current ev4_flush_tlb_current
-# define flush_tlb_current_page ev4_flush_tlb_current_page
-# else
-# define flush_tlb_current ev5_flush_tlb_current
-# define flush_tlb_current_page ev5_flush_tlb_current_page
-# endif
-#endif
+#define flush_tlb_current ev5_flush_tlb_current
+#define flush_tlb_current_page ev5_flush_tlb_current_page
#ifdef __MMU_EXTERN_INLINE
#undef __EXTERN_INLINE
: "=r"(__gu_val), "=r"(__gu_err) \
: "m"(__m(addr)), "1"(__gu_err))
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */
-
#define __get_user_16(addr) \
__asm__("1: ldwu %0,%2\n" \
"2:\n" \
EXC(1b,2b,%0,%1) \
: "=r"(__gu_val), "=r"(__gu_err) \
: "m"(__m(addr)), "1"(__gu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
- load, so we have to do a general unaligned operation. */
-
-#define __get_user_16(addr) \
-{ \
- long __gu_tmp; \
- __asm__("1: ldq_u %0,0(%3)\n" \
- "2: ldq_u %1,1(%3)\n" \
- " extwl %0,%3,%0\n" \
- " extwh %1,%3,%1\n" \
- " or %0,%1,%0\n" \
- "3:\n" \
- EXC(1b,3b,%0,%2) \
- EXC(2b,3b,%0,%2) \
- : "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err) \
- : "r"(addr), "2"(__gu_err)); \
-}
-
-#define __get_user_8(addr) \
- __asm__("1: ldq_u %0,0(%2)\n" \
- " extbl %0,%2,%0\n" \
- "2:\n" \
- EXC(1b,2b,%0,%1) \
- : "=&r"(__gu_val), "=r"(__gu_err) \
- : "r"(addr), "1"(__gu_err))
-#endif
extern void __put_user_unknown(void);
: "=r"(__pu_err) \
: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves. */
-
#define __put_user_16(x, addr) \
__asm__ __volatile__("1: stw %r2,%1\n" \
"2:\n" \
EXC(1b,2b,$31,%0) \
: "=r"(__pu_err) \
: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
- write, so we have to do a general unaligned operation. */
-
-#define __put_user_16(x, addr) \
-{ \
- long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4; \
- __asm__ __volatile__( \
- "1: ldq_u %2,1(%5)\n" \
- "2: ldq_u %1,0(%5)\n" \
- " inswh %6,%5,%4\n" \
- " inswl %6,%5,%3\n" \
- " mskwh %2,%5,%2\n" \
- " mskwl %1,%5,%1\n" \
- " or %2,%4,%2\n" \
- " or %1,%3,%1\n" \
- "3: stq_u %2,1(%5)\n" \
- "4: stq_u %1,0(%5)\n" \
- "5:\n" \
- EXC(1b,5b,$31,%0) \
- EXC(2b,5b,$31,%0) \
- EXC(3b,5b,$31,%0) \
- EXC(4b,5b,$31,%0) \
- : "=r"(__pu_err), "=&r"(__pu_tmp1), \
- "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), \
- "=&r"(__pu_tmp4) \
- : "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
-}
-
-#define __put_user_8(x, addr) \
-{ \
- long __pu_tmp1, __pu_tmp2; \
- __asm__ __volatile__( \
- "1: ldq_u %1,0(%4)\n" \
- " insbl %3,%4,%2\n" \
- " mskbl %1,%4,%1\n" \
- " or %1,%2,%1\n" \
- "2: stq_u %1,0(%4)\n" \
- "3:\n" \
- EXC(1b,3b,$31,%0) \
- EXC(2b,3b,$31,%0) \
- : "=r"(__pu_err), \
- "=&r"(__pu_tmp1), "=&r"(__pu_tmp2) \
- : "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
-}
-#endif
-
/*
* Complex access routines
#define __kernel_ldwu(mem) (mem)
#define __kernel_stb(val,mem) ((mem) = (val))
#define __kernel_stw(val,mem) ((mem) = (val))
-#else
-#define __kernel_ldbu(mem) \
- ({ unsigned char __kir; \
- __asm__(".arch ev56; \
- ldbu %0,%1" : "=r"(__kir) : "m"(mem)); \
- __kir; })
-#define __kernel_ldwu(mem) \
- ({ unsigned short __kir; \
- __asm__(".arch ev56; \
- ldwu %0,%1" : "=r"(__kir) : "m"(mem)); \
- __kir; })
-#define __kernel_stb(val,mem) \
- __asm__(".arch ev56; \
- stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem) \
- __asm__(".arch ev56; \
- stw %1,%0" : "=m"(mem) : "r"(val))
#endif
-
#endif /* _UAPI__ALPHA_COMPILER_H */
#define DO_DEFAULT_RTC .rtc_port = 0x70
-#define DO_EV4_MMU \
- .max_asn = EV4_MAX_ASN, \
- .mv_switch_mm = ev4_switch_mm, \
- .mv_activate_mm = ev4_activate_mm, \
- .mv_flush_tlb_current = ev4_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev4_flush_tlb_current_page
-
#define DO_EV5_MMU \
- .max_asn = EV5_MAX_ASN, \
- .mv_switch_mm = ev5_switch_mm, \
- .mv_activate_mm = ev5_activate_mm, \
- .mv_flush_tlb_current = ev5_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev5_flush_tlb_current_page
+ .max_asn = EV5_MAX_ASN \
#define DO_EV6_MMU \
- .max_asn = EV6_MAX_ASN, \
- .mv_switch_mm = ev5_switch_mm, \
- .mv_activate_mm = ev5_activate_mm, \
- .mv_flush_tlb_current = ev5_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev5_flush_tlb_current_page
+ .max_asn = EV6_MAX_ASN \
#define DO_EV7_MMU \
- .max_asn = EV6_MAX_ASN, \
- .mv_switch_mm = ev5_switch_mm, \
- .mv_activate_mm = ev5_activate_mm, \
- .mv_flush_tlb_current = ev5_flush_tlb_current, \
- .mv_flush_tlb_current_page = ev5_flush_tlb_current_page
+ .max_asn = EV6_MAX_ASN \
#define IO_LITE(UP,low) \
.hae_register = (unsigned long *) CAT(UP,_HAE_ADDRESS), \
#include "proto.h"
-/* Work-around for some SRMs which mishandle opDEC faults. */
-
-static int opDEC_fix;
-
-static void
-opDEC_check(void)
-{
- __asm__ __volatile__ (
- /* Load the address of... */
- " br $16, 1f\n"
- /* A stub instruction fault handler. Just add 4 to the
- pc and continue. */
- " ldq $16, 8($sp)\n"
- " addq $16, 4, $16\n"
- " stq $16, 8($sp)\n"
- " call_pal %[rti]\n"
- /* Install the instruction fault handler. */
- "1: lda $17, 3\n"
- " call_pal %[wrent]\n"
- /* With that in place, the fault from the round-to-minf fp
- insn will arrive either at the "lda 4" insn (bad) or one
- past that (good). This places the correct fixup in %0. */
- " lda %[fix], 0\n"
- " cvttq/svm $f31,$f31\n"
- " lda %[fix], 4"
- : [fix] "=r" (opDEC_fix)
- : [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
- : "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
-
- if (opDEC_fix)
- printk("opDEC fixup enabled.\n");
-}
-
void
dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
{
return;
case 4: /* opDEC */
- if (implver() == IMPLVER_EV4) {
- long si_code;
-
- /* The some versions of SRM do not handle
- the opDEC properly - they return the PC of the
- opDEC fault, not the instruction after as the
- Alpha architecture requires. Here we fix it up.
- We do this by intentionally causing an opDEC
- fault during the boot sequence and testing if
- we get the correct PC. If not, we set a flag
- to correct it every time through. */
- regs->pc += opDEC_fix;
-
- /* EV4 does not implement anything except normal
- rounding. Everything else will come here as
- an illegal instruction. Emulate them. */
- si_code = alpha_fp_emul(regs->pc - 4);
- if (si_code == 0)
- return;
- if (si_code > 0) {
- send_sig_fault_trapno(SIGFPE, si_code,
- (void __user *) regs->pc,
- 0, current);
- return;
- }
- }
break;
case 5: /* illoc */
register unsigned long gptr __asm__("$29");
wrkgp(gptr);
- /* Hack for Multia (UDB) and JENSEN: some of their SRMs have
- a bug in the handling of the opDEC fault. Fix it up if so. */
- if (implver() == IMPLVER_EV4)
- opDEC_check();
-
wrent(entArith, 1);
wrent(entMM, 2);
wrent(entIF, 3);
/*
* Block error status values. See block/blk-core:blk_errors for the details.
- * Alpha cannot write a byte atomically, so we need to use 32-bit value.
*/
-#if defined(CONFIG_ALPHA) && !defined(__alpha_bwx__)
-typedef u32 __bitwise blk_status_t;
-typedef u32 blk_short_t;
-#else
typedef u8 __bitwise blk_status_t;
typedef u16 blk_short_t;
-#endif
#define BLK_STS_OK 0
#define BLK_STS_NOTSUPP ((__force blk_status_t)1)
#define BLK_STS_TIMEOUT ((__force blk_status_t)2)
* @count: count of open processes, reaching zero cancels all the work for
* this tty and drops a @kref too (but does not free this tty)
* @winsize: size of the terminal "window" (cf. @winsize_mutex)
- * @flow: flow settings grouped together, see also @flow.unused
+ * @flow: flow settings grouped together
* @flow.lock: lock for @flow members
* @flow.stopped: tty stopped/started by stop_tty()/start_tty()
* @flow.tco_stopped: tty stopped/started by %TCOOFF/%TCOON ioctls (it has
* precedence over @flow.stopped)
- * @flow.unused: alignment for Alpha, so that no members other than @flow.* are
- * modified by the same 64b word store. The @flow's __aligned is
- * there for the very same reason.
- * @ctrl: control settings grouped together, see also @ctrl.unused
+ * @ctrl: control settings grouped together
* @ctrl.lock: lock for @ctrl members
* @ctrl.pgrp: process group of this tty (setpgrp(2))
* @ctrl.session: session of this tty (setsid(2)). Writes are protected by both
* them.
* @ctrl.pktstatus: packet mode status (bitwise OR of %TIOCPKT_ constants)
* @ctrl.packet: packet mode enabled
- * @ctrl.unused: alignment for Alpha, see @flow.unused for explanation
* @hw_stopped: not controlled by the tty layer, under @driver's control for CTS
* handling
* @receive_room: bytes permitted to feed to @ldisc without any being lost
spinlock_t lock;
bool stopped;
bool tco_stopped;
- unsigned long unused[0];
- } __aligned(sizeof(unsigned long)) flow;
+ } flow;
struct {
struct pid *pgrp;
spinlock_t lock;
unsigned char pktstatus;
bool packet;
- unsigned long unused[0];
- } __aligned(sizeof(unsigned long)) ctrl;
+ } ctrl;
bool hw_stopped;
bool closing;
projects / linux.git / commitdiff