arm64: dts: zynqmp: Use serdev for zcu100 BT

Mainline started to use serdev interface for uart attached devices.
Change description to reflect it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 3e862a9faf26dff4b08737b7367c20dff18e3c46..c7f713c8e69ed6de96c5c5f16f5d58b2473064f4 100644 (file)
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -89,12 +89,6 @@
                        gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
-
-               bt_power {
-                       label = "bt_power";
-                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
        };
 
        wmmcsdio_fixed: fixedregulator-mmcsdio {
@@ -267,6 +261,10 @@
 
 &uart0 {
        status = "okay";
+       bluetooth {
+               compatible = "ti,wl1831-st";
+               enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+       };
 };
 
 &uart1 {