This works now at the subcluster level and pwrite_zeroes_alignment is
updated accordingly.
qcow2_cluster_zeroize() is turned into qcow2_subcluster_zeroize() with
the following changes:
- The request can now be subcluster-aligned.
- The cluster-aligned body of the request is still zeroized using
zero_in_l2_slice() as before.
- The subcluster-aligned head and tail of the request are zeroized
with the new zero_l2_subclusters() function.
There is just one thing to take into account for a possible future
improvement: compressed clusters cannot be partially zeroized so
zero_l2_subclusters() on the head or the tail can return -ENOTSUP.
This makes the caller repeat the *complete* request and write actual
zeroes to disk. This is sub-optimal because
1) if the head area was compressed we would still be able to use
the fast path for the body and possibly the tail.
2) if the tail area was compressed we are writing zeroes to the
head and the body areas, which are already zeroized.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <
17e05e2ee7e12f10dcf012da81e83ebe27eb3bef.
1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
return nb_clusters;
}
-int qcow2_cluster_zeroize(BlockDriverState *bs, uint64_t offset,
- uint64_t bytes, int flags)
+static int zero_l2_subclusters(BlockDriverState *bs, uint64_t offset,
+ unsigned nb_subclusters)
+{
+ BDRVQcow2State *s = bs->opaque;
+ uint64_t *l2_slice;
+ uint64_t old_l2_bitmap, l2_bitmap;
+ int l2_index, ret, sc = offset_to_sc_index(s, offset);
+
+ /* For full clusters use zero_in_l2_slice() instead */
+ assert(nb_subclusters > 0 && nb_subclusters < s->subclusters_per_cluster);
+ assert(sc + nb_subclusters <= s->subclusters_per_cluster);
+ assert(offset_into_subcluster(s, offset) == 0);
+
+ ret = get_cluster_table(bs, offset, &l2_slice, &l2_index);
+ if (ret < 0) {
+ return ret;
+ }
+
+ switch (qcow2_get_cluster_type(bs, get_l2_entry(s, l2_slice, l2_index))) {
+ case QCOW2_CLUSTER_COMPRESSED:
+ ret = -ENOTSUP; /* We cannot partially zeroize compressed clusters */
+ goto out;
+ case QCOW2_CLUSTER_NORMAL:
+ case QCOW2_CLUSTER_UNALLOCATED:
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+ old_l2_bitmap = l2_bitmap = get_l2_bitmap(s, l2_slice, l2_index);
+
+ l2_bitmap |= QCOW_OFLAG_SUB_ZERO_RANGE(sc, sc + nb_subclusters);
+ l2_bitmap &= ~QCOW_OFLAG_SUB_ALLOC_RANGE(sc, sc + nb_subclusters);
+
+ if (old_l2_bitmap != l2_bitmap) {
+ set_l2_bitmap(s, l2_slice, l2_index, l2_bitmap);
+ qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_slice);
+ }
+
+ ret = 0;
+out:
+ qcow2_cache_put(s->l2_table_cache, (void **) &l2_slice);
+
+ return ret;
+}
+
+int qcow2_subcluster_zeroize(BlockDriverState *bs, uint64_t offset,
+ uint64_t bytes, int flags)
{
BDRVQcow2State *s = bs->opaque;
uint64_t end_offset = offset + bytes;
uint64_t nb_clusters;
+ unsigned head, tail;
int64_t cleared;
int ret;
}
/* Caller must pass aligned values, except at image end */
- assert(QEMU_IS_ALIGNED(offset, s->cluster_size));
- assert(QEMU_IS_ALIGNED(end_offset, s->cluster_size) ||
+ assert(offset_into_subcluster(s, offset) == 0);
+ assert(offset_into_subcluster(s, end_offset) == 0 ||
end_offset >= bs->total_sectors << BDRV_SECTOR_BITS);
/*
return -ENOTSUP;
}
- /* Each L2 slice is handled by its own loop iteration */
- nb_clusters = size_to_clusters(s, bytes);
+ head = MIN(end_offset, ROUND_UP(offset, s->cluster_size)) - offset;
+ offset += head;
+
+ tail = (end_offset >= bs->total_sectors << BDRV_SECTOR_BITS) ? 0 :
+ end_offset - MAX(offset, start_of_cluster(s, end_offset));
+ end_offset -= tail;
s->cache_discards = true;
+ if (head) {
+ ret = zero_l2_subclusters(bs, offset - head,
+ size_to_subclusters(s, head));
+ if (ret < 0) {
+ goto fail;
+ }
+ }
+
+ /* Each L2 slice is handled by its own loop iteration */
+ nb_clusters = size_to_clusters(s, end_offset - offset);
+
while (nb_clusters > 0) {
cleared = zero_in_l2_slice(bs, offset, nb_clusters, flags);
if (cleared < 0) {
offset += (cleared * s->cluster_size);
}
+ if (tail) {
+ ret = zero_l2_subclusters(bs, end_offset, size_to_subclusters(s, tail));
+ if (ret < 0) {
+ goto fail;
+ }
+ }
+
ret = 0;
fail:
s->cache_discards = false;
/* Encryption works on a sector granularity */
bs->bl.request_alignment = qcrypto_block_get_sector_size(s->crypto);
}
- bs->bl.pwrite_zeroes_alignment = s->cluster_size;
+ bs->bl.pwrite_zeroes_alignment = s->subcluster_size;
bs->bl.pdiscard_alignment = s->cluster_size;
}
int ret;
BDRVQcow2State *s = bs->opaque;
- uint32_t head = offset % s->cluster_size;
- uint32_t tail = (offset + bytes) % s->cluster_size;
+ uint32_t head = offset_into_subcluster(s, offset);
+ uint32_t tail = ROUND_UP(offset + bytes, s->subcluster_size) -
+ (offset + bytes);
trace_qcow2_pwrite_zeroes_start_req(qemu_coroutine_self(), offset, bytes);
if (offset + bytes == bs->total_sectors * BDRV_SECTOR_SIZE) {
unsigned int nr;
QCow2SubclusterType type;
- assert(head + bytes <= s->cluster_size);
+ assert(head + bytes + tail <= s->subcluster_size);
/* check whether remainder of cluster already reads as zero */
if (!(is_zero(bs, offset - head, head) &&
- is_zero(bs, offset + bytes,
- tail ? s->cluster_size - tail : 0))) {
+ is_zero(bs, offset + bytes, tail))) {
return -ENOTSUP;
}
qemu_co_mutex_lock(&s->lock);
/* We can have new write after previous check */
- offset = QEMU_ALIGN_DOWN(offset, s->cluster_size);
- bytes = s->cluster_size;
- nr = s->cluster_size;
+ offset -= head;
+ bytes = s->subcluster_size;
+ nr = s->subcluster_size;
ret = qcow2_get_host_offset(bs, offset, &nr, &off, &type);
if (ret < 0 ||
(type != QCOW2_SUBCLUSTER_UNALLOCATED_PLAIN &&
trace_qcow2_pwrite_zeroes(qemu_coroutine_self(), offset, bytes);
- /* Whatever is left can use real zero clusters */
- ret = qcow2_cluster_zeroize(bs, offset, bytes, flags);
+ /* Whatever is left can use real zero subclusters */
+ ret = qcow2_subcluster_zeroize(bs, offset, bytes, flags);
qemu_co_mutex_unlock(&s->lock);
return ret;
}
if ((flags & BDRV_REQ_ZERO_WRITE) && offset > old_length) {
- uint64_t zero_start = QEMU_ALIGN_UP(old_length, s->cluster_size);
+ uint64_t zero_start = QEMU_ALIGN_UP(old_length, s->subcluster_size);
/*
- * Use zero clusters as much as we can. qcow2_cluster_zeroize()
- * requires a cluster-aligned start. The end may be unaligned if it is
- * at the end of the image (which it is here).
+ * Use zero clusters as much as we can. qcow2_subcluster_zeroize()
+ * requires a subcluster-aligned start. The end may be unaligned if
+ * it is at the end of the image (which it is here).
*/
if (offset > zero_start) {
- ret = qcow2_cluster_zeroize(bs, zero_start, offset - zero_start, 0);
+ ret = qcow2_subcluster_zeroize(bs, zero_start, offset - zero_start,
+ 0);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to zero out new clusters");
goto fail;
int qcow2_cluster_discard(BlockDriverState *bs, uint64_t offset,
uint64_t bytes, enum qcow2_discard_type type,
bool full_discard);
-int qcow2_cluster_zeroize(BlockDriverState *bs, uint64_t offset,
- uint64_t bytes, int flags);
+int qcow2_subcluster_zeroize(BlockDriverState *bs, uint64_t offset,
+ uint64_t bytes, int flags);
int qcow2_expand_zero_clusters(BlockDriverState *bs,
BlockDriverAmendStatusCB *status_cb,
projects / qemu.git / commitdiff