ARM: dts: qcom: sdx55: Move reset and wake gpios to board dts

The reset and wake properties in the PCIe EP node belong to the board dts
as they can be customized per board design. So let's move them from SoC
dtsi.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230331145915.11653-1-manivannan.sadhasivam@linaro.org

diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index 81f33eba39e5f1227fafd9f9cb61da9e90bcdb6d..b73b707342af62e193b458edde6515f6e754fcbc 100644 (file)
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -255,6 +255,9 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
                     &pcie_ep_wake_default>;
+
+       reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+       wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
 };
 
 &qpic_bam {

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 9148a840b8a0c4c348af5e0dddcb34a6f343db62..342c3d14001eba55702450dbf5f48d01386053f1 100644 (file)
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -421,8 +421,6 @@
                                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "global",
                                          "doorbell";
-                       reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-                       wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
                        resets = <&gcc GCC_PCIE_BCR>;
                        reset-names = "core";
                        power-domains = <&gcc PCIE_GDSC>;