cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts

[ Upstream commit e4e6448638a01905faeda9bf96aa9df7c8ef463c ]

It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index e73ecab23c8530507351689d60f8499a88c6a5bb..bb2f59fd0de432e34d3e3668d26776bbc0f4eda4 100644 (file)
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -24,6 +24,8 @@
 #define CLK_HW_DIV                     2
 #define LUT_TURBO_IND                  1
 
+#define GT_IRQ_STATUS                  BIT(2)
+
 #define HZ_PER_KHZ                     1000
 
 struct qcom_cpufreq_soc_data {
@@ -31,6 +33,7 @@ struct qcom_cpufreq_soc_data {
        u32 reg_domain_state;
        u32 reg_freq_lut;
        u32 reg_volt_lut;
+       u32 reg_intr_clr;
        u32 reg_current_vote;
        u32 reg_perf_state;
        u8 lut_row_size;
@@ -349,6 +352,10 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
        disable_irq_nosync(c_data->throttle_irq);
        schedule_delayed_work(&c_data->throttle_work, 0);
 
+       if (c_data->soc_data->reg_intr_clr)
+               writel_relaxed(GT_IRQ_STATUS,
+                              c_data->base + c_data->soc_data->reg_intr_clr);
+
        return IRQ_HANDLED;
 }
 
@@ -366,6 +373,7 @@ static const struct qcom_cpufreq_soc_data epss_soc_data = {
        .reg_domain_state = 0x20,
        .reg_freq_lut = 0x100,
        .reg_volt_lut = 0x200,
+       .reg_intr_clr = 0x308,
        .reg_perf_state = 0x320,
        .lut_row_size = 4,
 };