#define SUN6I_TXDATA_REG 0x200
#define SUN6I_RXDATA_REG 0x300
+struct sun6i_spi_cfg {
+ unsigned long fifo_depth;
+};
+
struct sun6i_spi {
struct spi_master *master;
void __iomem *base_addr;
const u8 *tx_buf;
u8 *rx_buf;
int len;
- unsigned long fifo_depth;
+ const struct sun6i_spi_cfg *cfg;
};
static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
u8 byte;
/* See how much data we can fit */
- cnt = sspi->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
+ cnt = sspi->cfg->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
len = min((int)cnt, sspi->len);
* the hardcoded value used in old generation of Allwinner
* SPI controller. (See spi-sun4i.c)
*/
- trig_level = sspi->fifo_depth / 4 * 3;
+ trig_level = sspi->cfg->fifo_depth / 4 * 3;
} else {
/*
* Setup FIFO DMA request trigger level
* We choose 1/2 of the full fifo depth, that value will
* be used as DMA burst length.
*/
- trig_level = sspi->fifo_depth / 2;
+ trig_level = sspi->cfg->fifo_depth / 2;
if (tfr->tx_buf)
reg |= SUN6I_FIFO_CTL_TF_DRQ_EN;
reg = SUN6I_INT_CTL_TC;
if (!use_dma) {
- if (rx_len > sspi->fifo_depth)
+ if (rx_len > sspi->cfg->fifo_depth)
reg |= SUN6I_INT_CTL_RF_RDY;
- if (tx_len > sspi->fifo_depth)
+ if (tx_len > sspi->cfg->fifo_depth)
reg |= SUN6I_INT_CTL_TF_ERQ;
}
* the fifo length we can just fill the fifo and wait for a single
* irq, so don't bother setting up dma
*/
- return xfer->len > sspi->fifo_depth;
+ return xfer->len > sspi->cfg->fifo_depth;
}
static int sun6i_spi_probe(struct platform_device *pdev)
}
sspi->master = master;
- sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);
+ sspi->cfg = of_device_get_match_data(&pdev->dev);
master->max_speed_hz = 100 * 1000 * 1000;
master->min_speed_hz = 3 * 1000;
dma_release_channel(master->dma_rx);
}
+static const struct sun6i_spi_cfg sun6i_a31_spi_cfg = {
+ .fifo_depth = SUN6I_FIFO_DEPTH,
+};
+
+static const struct sun6i_spi_cfg sun8i_h3_spi_cfg = {
+ .fifo_depth = SUN8I_FIFO_DEPTH,
+};
+
static const struct of_device_id sun6i_spi_match[] = {
- { .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
- { .compatible = "allwinner,sun8i-h3-spi", .data = (void *)SUN8I_FIFO_DEPTH },
+ { .compatible = "allwinner,sun6i-a31-spi", .data = &sun6i_a31_spi_cfg },
+ { .compatible = "allwinner,sun8i-h3-spi", .data = &sun8i_h3_spi_cfg },
{}
};
MODULE_DEVICE_TABLE(of, sun6i_spi_match);