Revert "PPC: Qdev'ify e500 pci"

This reverts commit 13b7fdeffa68e3382231a70308593ae6a75d96c3.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

diff --git a/hw/ppce500_pci.c b/hw/ppce500_pci.c
index 3fa42d2cdc960f2cc068cda97e2cd5ff55f4ae5f..8ac99f2817655e090e28ee40d1487b3e14f2fc57 100644 (file)
--- a/hw/ppce500_pci.c
+++ b/hw/ppce500_pci.c
@@ -73,11 +73,11 @@ struct pci_inbound {
 };
 
 struct PPCE500PCIState {
-    PCIHostState pci_state;
     struct pci_outbound pob[PPCE500_PCI_NR_POBS];
     struct pci_inbound pib[PPCE500_PCI_NR_PIBS];
     uint32_t gasket_time;
-    uint64_t base_addr;
+    PCIHostState pci_state;
+    PCIDevice *pci_dev;
 };
 
 typedef struct PPCE500PCIState PPCE500PCIState;
@@ -221,7 +221,7 @@ static void ppce500_pci_save(QEMUFile *f, void *opaque)
     PPCE500PCIState *controller = opaque;
     int i;
 
-    /* pci_device_save(controller->pci_dev, f); */
+    pci_device_save(controller->pci_dev, f);
 
     for (i = 0; i < PPCE500_PCI_NR_POBS; i++) {
         qemu_put_be32s(f, &controller->pob[i].potar);
@@ -247,7 +247,7 @@ static int ppce500_pci_load(QEMUFile *f, void *opaque, int version_id)
     if (version_id != 1)
         return -EINVAL;
 
-    /* pci_device_load(controller->pci_dev, f); */
+    pci_device_load(controller->pci_dev, f);
 
     for (i = 0; i < PPCE500_PCI_NR_POBS; i++) {
         qemu_get_be32s(f, &controller->pob[i].potar);
@@ -269,95 +269,55 @@ static int ppce500_pci_load(QEMUFile *f, void *opaque, int version_id)
 
 PCIBus *ppce500_pci_init(qemu_irq pci_irqs[4], target_phys_addr_t registers)
 {
-    DeviceState *dev;
-    PCIBus *b;
-    PCIHostState *h;
-    PPCE500PCIState *s;
+    PPCE500PCIState *controller;
     PCIDevice *d;
+    int index;
     static int ppce500_pci_id;
 
-    dev = qdev_create(NULL, "e500-pcihost");
-    h = FROM_SYSBUS(PCIHostState, sysbus_from_qdev(dev));
-    s = DO_UPCAST(PPCE500PCIState, pci_state, h);
-
-    qdev_prop_set_uint64(dev, "base_addr", registers);
-    b = pci_register_bus(&s->pci_state.busdev.qdev, NULL, mpc85xx_pci_set_irq,
-                         mpc85xx_pci_map_irq, pci_irqs, PCI_DEVFN(0x11, 0), 4);
-
-    s->pci_state.bus = b;
-    qdev_init_nofail(dev);
-    d = pci_create_simple(b, 0, "e500-host-bridge");
-
-    /* XXX load/save code not tested. */
-    register_savevm(&d->qdev, "ppce500_pci", ppce500_pci_id++,
-                    1, ppce500_pci_save, ppce500_pci_load, s);
+    controller = qemu_mallocz(sizeof(PPCE500PCIState));
 
-    return b;
-}
+    controller->pci_state.bus = pci_register_bus(NULL, "pci",
+                                                 mpc85xx_pci_set_irq,
+                                                 mpc85xx_pci_map_irq,
+                                                 pci_irqs, PCI_DEVFN(0x11, 0),
+                                                 4);
+    d = pci_register_device(controller->pci_state.bus,
+                            "host bridge", sizeof(PCIDevice),
+                            0, NULL, NULL);
 
-static int e500_pcihost_initfn(SysBusDevice *dev)
-{
-    PCIHostState *h;
-    PPCE500PCIState *s;
-    target_phys_addr_t registers;
-    int index;
+    pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_FREESCALE);
+    pci_config_set_device_id(d->config, PCI_DEVICE_ID_MPC8533E);
+    pci_config_set_class(d->config, PCI_CLASS_PROCESSOR_POWERPC);
 
-    h = FROM_SYSBUS(PCIHostState, sysbus_from_qdev(dev));
-    s = DO_UPCAST(PPCE500PCIState, pci_state, h);
-    registers = (target_phys_addr_t)s->base_addr;
+    controller->pci_dev = d;
 
     /* CFGADDR */
-    index = pci_host_conf_register_mmio(&s->pci_state, 0);
+    index = pci_host_conf_register_mmio(&controller->pci_state, 0);
     if (index < 0)
-        return -1;
+        goto free;
     cpu_register_physical_memory(registers + PCIE500_CFGADDR, 4, index);
 
     /* CFGDATA */
-    index = pci_host_data_register_mmio(&s->pci_state, 0);
+    index = pci_host_data_register_mmio(&controller->pci_state, 0);
     if (index < 0)
-        return -1;
+        goto free;
     cpu_register_physical_memory(registers + PCIE500_CFGDATA, 4, index);
 
     index = cpu_register_io_memory(e500_pci_reg_read,
-                                   e500_pci_reg_write, s);
+                                   e500_pci_reg_write, controller);
     if (index < 0)
-        return -1;
+        goto free;
     cpu_register_physical_memory(registers + PCIE500_REG_BASE,
                                    PCIE500_REG_SIZE, index);
-    return 0;
-}
-
-static int e500_host_bridge_initfn(PCIDevice *dev)
-{
-    pci_config_set_vendor_id(dev->config, PCI_VENDOR_ID_FREESCALE);
-    pci_config_set_device_id(dev->config, PCI_DEVICE_ID_MPC8533E);
-    pci_config_set_class(dev->config, PCI_CLASS_PROCESSOR_POWERPC);
-
-    return 0;
-}
 
-static PCIDeviceInfo e500_host_bridge_info = {
-    .qdev.name    = "e500-host-bridge",
-    .qdev.desc    = "Host bridge",
-    .qdev.size    = sizeof(PCIDevice),
-    .qdev.no_user = 1,
-    .init         = e500_host_bridge_initfn,
-};
+    /* XXX load/save code not tested. */
+    register_savevm(&d->qdev, "ppce500_pci", ppce500_pci_id++,
+                    1, ppce500_pci_save, ppce500_pci_load, controller);
 
-static SysBusDeviceInfo e500_pcihost_info = {
-    .init         = e500_pcihost_initfn,
-    .qdev.name    = "e500-pcihost",
-    .qdev.size    = sizeof(PPCE500PCIState),
-    .qdev.no_user = 1,
-    .qdev.props = (Property[]) {
-        DEFINE_PROP_UINT64("base_addr", PPCE500PCIState, base_addr, 0),
-        DEFINE_PROP_END_OF_LIST(),
-    }
-};
+    return controller->pci_state.bus;
 
-static void e500_pci_register(void)
-{
-    sysbus_register_withprop(&e500_pcihost_info);
-    pci_qdev_register(&e500_host_bridge_info);
+free:
+    printf("%s error\n", __func__);
+    qemu_free(controller);
+    return NULL;
 }
-device_init(e500_pci_register);