iio: pressure: bmp280: Add support for BMP390

Add BMP390 device ID to the supported IDs on bmp380 sensor family

Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Link: https://lore.kernel.org/r/d6a9e9ca4670c7401545d0d086cd3059e29044c8.1697994521.git.ang.iglesiasg@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index cc24473762d72e0e18cb0a8c17875b2517def72f..fe8734468ed352589a0d09ddc9c3a3509b3d3fad 100644 (file)
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -13,6 +13,7 @@
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf
  * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf
  *
  * Notice:
@@ -1225,7 +1226,7 @@ static int bmp380_chip_config(struct bmp280_data *data)
 
 static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 };
 static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128};
-static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID };
+static const u8 bmp380_chip_ids[] = { BMP380_CHIP_ID, BMP390_CHIP_ID };
 
 const struct bmp280_chip_info bmp380_chip_info = {
        .id_reg = BMP380_REG_ID,

diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index a44ea33221635fb74e0f9424dac6ab5d4e4a224c..4012387d79565631e9c8fdd0152f859c80eac485 100644 (file)
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -292,6 +292,7 @@
 #define BMP580_CHIP_ID_ALT             0x51
 #define BMP180_CHIP_ID                 0x55
 #define BMP280_CHIP_ID                 0x58
+#define BMP390_CHIP_ID                 0x60
 #define BME280_CHIP_ID                 0x60
 #define BMP280_SOFT_RESET_VAL          0xB6