net: phy: broadcom: Fix RGMII delays for BCM50160 and BCM50610M

The PHY driver entry for BCM50160 and BCM50610M calls
bcm54xx_config_init() but does not call bcm54xx_config_clock_delay() in
order to configuration appropriate clock delays on the PHY, fix that.

Fixes: 733336262b28 ("net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index ad51f188943507d2c5bc1d29a30778e7c8e18c17..82fe5f43f0e913c0ebd172c2ff76482759d92fda 100644 (file)
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -342,6 +342,10 @@ static int bcm54xx_config_init(struct phy_device *phydev)
        bcm54xx_adjust_rxrefclk(phydev);
 
        switch (BRCM_PHY_MODEL(phydev)) {
+       case PHY_ID_BCM50610:
+       case PHY_ID_BCM50610M:
+               err = bcm54xx_config_clock_delay(phydev);
+               break;
        case PHY_ID_BCM54210E:
                err = bcm54210e_config_init(phydev);
                break;