iotests: Let 233 run concurrently

common.nbd's nbd_server_set_tcp_port() tries to find a free port, and
then uses it for the whole test run.  However, this is racy because even
if the port was free at the beginning, there is no guarantee it will
continue to be available.  Therefore, 233 currently cannot reliably be
run concurrently with other NBD TCP tests.

This patch addresses the problem by dropping nbd_server_set_tcp_port(),
and instead finding a new port every time nbd_server_start_tcp_socket()
is invoked.  For this, we run qemu-nbd with --fork and on error evaluate
the output to see whether it contains "Address already in use".  If so,
we try the next port.

On success, we still want to continually redirect the output from
qemu-nbd to stderr.  To achieve both, we redirect qemu-nbd's stderr to a
FIFO that we then open in bash.  If the parent process exits with status
0 (which means that the server has started successfully), we launch a
background cat process that copies the FIFO to stderr.  On failure, we
read the whole content into a variable and then evaluate it.

While at it, use --fork in nbd_server_start_unix_socket(), too.  Doing
so allows us to drop nbd_server_wait_for_*_socket().

Note that the reason common.nbd did not use --fork before is that
qemu-nbd did not have --pid-file.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508211820.17851-6-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

diff --git a/tests/qemu-iotests/233 b/tests/qemu-iotests/233
index 057cad204460d7b9ac2a97e0d4fb74a4b00cb0d0..a5c17c39639de6fc94cb7c2cab3bf603f62e6d62 100755 (executable)
--- a/tests/qemu-iotests/233
+++ b/tests/qemu-iotests/233
@@ -49,7 +49,6 @@ _supported_proto file
 # If porting to non-Linux, consider using socat instead of ss in common.nbd
 _require_command QEMU_NBD
 
-nbd_server_set_tcp_port
 tls_x509_init
 
 echo

diff --git a/tests/qemu-iotests/common.nbd b/tests/qemu-iotests/common.nbd
index 25fc9ffaa46b3411983a35288c5ffdd75b8a4eae..24b01b60aae183c768f7625acd6cc9e92aa0aa72 100644 (file)
--- a/tests/qemu-iotests/common.nbd
+++ b/tests/qemu-iotests/common.nbd
@@ -22,6 +22,11 @@
 nbd_unix_socket="${TEST_DIR}/qemu-nbd.sock"
 nbd_tcp_addr="127.0.0.1"
 nbd_pid_file="${TEST_DIR}/qemu-nbd.pid"
+nbd_stderr_fifo="${TEST_DIR}/qemu-nbd.fifo"
+
+# If bash version is >= 4.1, this will be overwritten by a dynamically
+# assigned file descriptor value.
+nbd_fifo_fd=10
 
 nbd_server_stop()
 {
@@ -33,77 +38,62 @@ nbd_server_stop()
             kill "$NBD_PID"
         fi
     fi
-    rm -f "$nbd_unix_socket"
-}
-
-nbd_server_wait_for_unix_socket()
-{
-    pid=$1
-
-    for ((i = 0; i < 300; i++))
-    do
-        if [ -r "$nbd_unix_socket" ]; then
-            return
-        fi
-        kill -s 0 $pid 2>/dev/null
-        if test $? != 0
-        then
-            echo "qemu-nbd unexpectedly quit"
-            exit 1
-        fi
-        sleep 0.1
-    done
-    echo "Failed in check of unix socket created by qemu-nbd"
-    exit 1
+    rm -f "$nbd_unix_socket" "$nbd_stderr_fifo"
 }
 
 nbd_server_start_unix_socket()
 {
     nbd_server_stop
-    $QEMU_NBD -v -t -k "$nbd_unix_socket" "$@" &
-    nbd_server_wait_for_unix_socket $!
+    $QEMU_NBD -v -t -k "$nbd_unix_socket" --fork "$@"
 }
 
-nbd_server_set_tcp_port()
+nbd_server_start_tcp_socket()
 {
-    (ss --help) >/dev/null 2>&1 || _notrun "ss utility not found, skipping test"
+    nbd_server_stop
 
+    mkfifo "$nbd_stderr_fifo"
     for ((port = 10809; port <= 10909; port++))
     do
-        if ! ss -tln | grep -sqE ":$port\b"; then
+        # Redirect stderr to FIFO, so we can later decide whether we
+        # want to read it or to redirect it to our stderr, depending
+        # on whether the command fails or not
+        $QEMU_NBD -v -t -b $nbd_tcp_addr -p $port --fork "$@" \
+            2> "$nbd_stderr_fifo" &
+
+        # Taken from common.qemu
+        if [[ "${BASH_VERSINFO[0]}" -ge "5" ||
+            ("${BASH_VERSINFO[0]}" -ge "4" && "${BASH_VERSINFO[1]}" -ge "1") ]]
+        then
+            exec {nbd_fifo_fd}<"$nbd_stderr_fifo"
+        else
+            let _nbd_fifo_fd++
+            eval "exec ${_nbd_fifo_fd}<'$nbd_stderr_fifo'"
+        fi
+        wait $!
+
+        if test $? == 0
+        then
+            # Success, redirect qemu-nbd's stderr to our stderr
             nbd_tcp_port=$port
+            (cat <&$nbd_fifo_fd >&2) &
+            eval "exec $nbd_fifo_fd>&-"
             return
         fi
-    done
 
-    echo "Cannot find free TCP port for nbd in range 10809-10909"
-    exit 1
-}
-
-nbd_server_wait_for_tcp_socket()
-{
-    pid=$1
+        # Failure, read the output
+        output=$(cat <&$nbd_fifo_fd)
+        eval "exec $nbd_fifo_fd>&-"
 
-    for ((i = 0; i < 300; i++))
-    do
-        if ss -tln | grep -sqE ":$nbd_tcp_port\b"; then
-            return
-        fi
-        kill -s 0 $pid 2>/dev/null
-        if test $? != 0
+        if ! echo "$output" | grep -q "Address already in use"
         then
-            echo "qemu-nbd unexpectedly quit"
+            # Unknown error, print it
+            echo "$output" >&2
+            rm -f "$nbd_stderr_fifo"
             exit 1
         fi
-        sleep 0.1
     done
-    echo "Failed in check of TCP socket created by qemu-nbd"
-    exit 1
-}
 
-nbd_server_start_tcp_socket()
-{
-    nbd_server_stop
-    $QEMU_NBD -v -t -b $nbd_tcp_addr -p $nbd_tcp_port "$@" &
-    nbd_server_wait_for_tcp_socket $!
+    echo "Cannot find free TCP port for nbd in range 10809-10909"
+    rm -f "$nbd_stderr_fifo"
+    exit 1
 }