arm64: dts: allwinner: sun50i-a64: Use macros for newly exported clocks

A few clocks from the CCU were exported later, and references to them in
the device tree were using raw numbers.

Now that the DT binding header changes are in as well, switch to the
macros for more clarity.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 92688b89c2a436653f4441d3c918efba4e3c6b89..293059ffbbf62f58ad20fe29bfd76b15349e1c00 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -590,7 +590,7 @@
                        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&ccu 58>, <&osc24M>, <&rtc 0>;
+                       clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
                        clock-names = "apb", "hosc", "losc";
                        gpio-controller;
                        #gpio-cells = <3>;
@@ -1091,7 +1091,7 @@
                        compatible = "allwinner,sun50i-a64-hdmi-phy";
                        reg = <0x01ef0000 0x10000>;
                        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-                                <&ccu 7>;
+                                <&ccu CLK_PLL_VIDEO0>;
                        clock-names = "bus", "mod", "pll-0";
                        resets = <&ccu RST_BUS_HDMI0>;
                        reset-names = "phy";
@@ -1121,7 +1121,8 @@
                r_ccu: clock@1f01400 {
                        compatible = "allwinner,sun50i-a64-r-ccu";
                        reg = <0x01f01400 0x100>;
-                       clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>;
+                       clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+                                <&ccu CLK_PLL_PERIPH0>;
                        clock-names = "hosc", "losc", "iosc", "pll-periph";
                        #clock-cells = <1>;
                        #reset-cells = <1>;