--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery charger driver for RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/mfd/rt5033-private.h>
+
+struct rt5033_charger_data {
+ unsigned int pre_uamp;
+ unsigned int pre_uvolt;
+ unsigned int const_uvolt;
+ unsigned int eoc_uamp;
+ unsigned int fast_uamp;
+};
+
+struct rt5033_charger {
+ struct device *dev;
+ struct regmap *regmap;
+ struct power_supply *psy;
+ struct rt5033_charger_data *chg;
+};
+
+static int rt5033_get_charger_state(struct rt5033_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ unsigned int reg_data;
+ int state;
+
+ if (!regmap)
+ return POWER_SUPPLY_STATUS_UNKNOWN;
+
+ regmap_read(regmap, RT5033_REG_CHG_STAT, ®_data);
+
+ switch (reg_data & RT5033_CHG_STAT_MASK) {
+ case RT5033_CHG_STAT_DISCHARGING:
+ state = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case RT5033_CHG_STAT_CHARGING:
+ state = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case RT5033_CHG_STAT_FULL:
+ state = POWER_SUPPLY_STATUS_FULL;
+ break;
+ case RT5033_CHG_STAT_NOT_CHARGING:
+ state = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ default:
+ state = POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+
+ return state;
+}
+
+static int rt5033_get_charger_type(struct rt5033_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ unsigned int reg_data;
+ int state;
+
+ regmap_read(regmap, RT5033_REG_CHG_STAT, ®_data);
+
+ switch (reg_data & RT5033_CHG_STAT_TYPE_MASK) {
+ case RT5033_CHG_STAT_TYPE_FAST:
+ state = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case RT5033_CHG_STAT_TYPE_PRE:
+ state = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ default:
+ state = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ }
+
+ return state;
+}
+
+static int rt5033_get_charger_current_limit(struct rt5033_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ unsigned int state, reg_data, data;
+
+ regmap_read(regmap, RT5033_REG_CHG_CTRL5, ®_data);
+
+ state = (reg_data & RT5033_CHGCTRL5_ICHG_MASK)
+ >> RT5033_CHGCTRL5_ICHG_SHIFT;
+
+ data = RT5033_CHARGER_FAST_CURRENT_MIN +
+ RT5033_CHARGER_FAST_CURRENT_STEP_NUM * state;
+
+ return data;
+}
+
+static int rt5033_get_charger_const_voltage(struct rt5033_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ unsigned int state, reg_data, data;
+
+ regmap_read(regmap, RT5033_REG_CHG_CTRL2, ®_data);
+
+ state = (reg_data & RT5033_CHGCTRL2_CV_MASK)
+ >> RT5033_CHGCTRL2_CV_SHIFT;
+
+ data = RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN +
+ RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM * state;
+
+ return data;
+}
+
+static inline int rt5033_init_const_charge(struct rt5033_charger *charger)
+{
+ struct rt5033_charger_data *chg = charger->chg;
+ int ret;
+ unsigned int val;
+ u8 reg_data;
+
+ /* Set constant voltage mode */
+ if (chg->const_uvolt < RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN ||
+ chg->const_uvolt > RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX) {
+ dev_err(charger->dev,
+ "Value 'constant-charge-voltage-max-microvolt' out of range\n");
+ return -EINVAL;
+ }
+
+ if (chg->const_uvolt == RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN)
+ reg_data = 0x00;
+ else if (chg->const_uvolt == RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX)
+ reg_data = RT5033_CV_MAX_VOLTAGE;
+ else {
+ val = chg->const_uvolt;
+ val -= RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN;
+ val /= RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM;
+ reg_data = val;
+ }
+
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL2,
+ RT5033_CHGCTRL2_CV_MASK,
+ reg_data << RT5033_CHGCTRL2_CV_SHIFT);
+ if (ret) {
+ dev_err(charger->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ /* Set end of charge current */
+ if (chg->eoc_uamp < RT5033_CHARGER_EOC_MIN ||
+ chg->eoc_uamp > RT5033_CHARGER_EOC_MAX) {
+ dev_err(charger->dev,
+ "Value 'charge-term-current-microamp' out of range\n");
+ return -EINVAL;
+ }
+
+ if (chg->eoc_uamp == RT5033_CHARGER_EOC_MIN)
+ reg_data = 0x01;
+ else if (chg->eoc_uamp == RT5033_CHARGER_EOC_MAX)
+ reg_data = 0x07;
+ else {
+ val = chg->eoc_uamp;
+ if (val < RT5033_CHARGER_EOC_REF) {
+ val -= RT5033_CHARGER_EOC_MIN;
+ val /= RT5033_CHARGER_EOC_STEP_NUM1;
+ reg_data = 0x01 + val;
+ } else if (val > RT5033_CHARGER_EOC_REF) {
+ val -= RT5033_CHARGER_EOC_REF;
+ val /= RT5033_CHARGER_EOC_STEP_NUM2;
+ reg_data = 0x04 + val;
+ } else {
+ reg_data = 0x04;
+ }
+ }
+
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL4,
+ RT5033_CHGCTRL4_EOC_MASK, reg_data);
+ if (ret) {
+ dev_err(charger->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int rt5033_init_fast_charge(struct rt5033_charger *charger)
+{
+ struct rt5033_charger_data *chg = charger->chg;
+ int ret;
+ unsigned int val;
+ u8 reg_data;
+
+ /* Set limit input current */
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL1,
+ RT5033_CHGCTRL1_IAICR_MASK, RT5033_AICR_2000_MODE);
+ if (ret) {
+ dev_err(charger->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ /* Set fast-charge mode charging current */
+ if (chg->fast_uamp < RT5033_CHARGER_FAST_CURRENT_MIN ||
+ chg->fast_uamp > RT5033_CHARGER_FAST_CURRENT_MAX) {
+ dev_err(charger->dev,
+ "Value 'constant-charge-current-max-microamp' out of range\n");
+ return -EINVAL;
+ }
+
+ if (chg->fast_uamp == RT5033_CHARGER_FAST_CURRENT_MIN)
+ reg_data = 0x00;
+ else if (chg->fast_uamp == RT5033_CHARGER_FAST_CURRENT_MAX)
+ reg_data = RT5033_CHG_MAX_CURRENT;
+ else {
+ val = chg->fast_uamp;
+ val -= RT5033_CHARGER_FAST_CURRENT_MIN;
+ val /= RT5033_CHARGER_FAST_CURRENT_STEP_NUM;
+ reg_data = val;
+ }
+
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL5,
+ RT5033_CHGCTRL5_ICHG_MASK,
+ reg_data << RT5033_CHGCTRL5_ICHG_SHIFT);
+ if (ret) {
+ dev_err(charger->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int rt5033_init_pre_charge(struct rt5033_charger *charger)
+{
+ struct rt5033_charger_data *chg = charger->chg;
+ int ret;
+ unsigned int val;
+ u8 reg_data;
+
+ /* Set pre-charge threshold voltage */
+ if (chg->pre_uvolt < RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN ||
+ chg->pre_uvolt > RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX) {
+ dev_err(charger->dev,
+ "Value 'precharge-upper-limit-microvolt' out of range\n");
+ return -EINVAL;
+ }
+
+ if (chg->pre_uvolt == RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN)
+ reg_data = 0x00;
+ else if (chg->pre_uvolt == RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MAX)
+ reg_data = 0x0f;
+ else {
+ val = chg->pre_uvolt;
+ val -= RT5033_CHARGER_PRE_THRESHOLD_LIMIT_MIN;
+ val /= RT5033_CHARGER_PRE_THRESHOLD_STEP_NUM;
+ reg_data = val;
+ }
+
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL5,
+ RT5033_CHGCTRL5_VPREC_MASK, reg_data);
+ if (ret) {
+ dev_err(charger->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ /* Set pre-charge mode charging current */
+ if (chg->pre_uamp < RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN ||
+ chg->pre_uamp > RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX) {
+ dev_err(charger->dev,
+ "Value 'precharge-current-microamp' out of range\n");
+ return -EINVAL;
+ }
+
+ if (chg->pre_uamp == RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN)
+ reg_data = 0x00;
+ else if (chg->pre_uamp == RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX)
+ reg_data = RT5033_CHG_MAX_PRE_CURRENT;
+ else {
+ val = chg->pre_uamp;
+ val -= RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN;
+ val /= RT5033_CHARGER_PRE_CURRENT_STEP_NUM;
+ reg_data = val;
+ }
+
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL4,
+ RT5033_CHGCTRL4_IPREC_MASK,
+ reg_data << RT5033_CHGCTRL4_IPREC_SHIFT);
+ if (ret) {
+ dev_err(charger->dev, "Failed regmap update\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rt5033_charger_reg_init(struct rt5033_charger *charger)
+{
+ int ret = 0;
+
+ /* Enable charging termination */
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL1,
+ RT5033_CHGCTRL1_TE_EN_MASK, RT5033_TE_ENABLE);
+ if (ret) {
+ dev_err(charger->dev, "Failed to enable charging termination.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Disable minimum input voltage regulation (MIVR), this improves
+ * the charging performance.
+ */
+ ret = regmap_update_bits(charger->regmap, RT5033_REG_CHG_CTRL4,
+ RT5033_CHGCTRL4_MIVR_MASK, RT5033_CHARGER_MIVR_DISABLE);
+ if (ret) {
+ dev_err(charger->dev, "Failed to disable MIVR.\n");
+ return -EINVAL;
+ }
+
+ ret = rt5033_init_pre_charge(charger);
+ if (ret)
+ return ret;
+
+ ret = rt5033_init_fast_charge(charger);
+ if (ret)
+ return ret;
+
+ ret = rt5033_init_const_charge(charger);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static enum power_supply_property rt5033_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int rt5033_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rt5033_charger *charger = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = rt5033_get_charger_state(charger);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = rt5033_get_charger_type(charger);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = rt5033_get_charger_current_limit(charger);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ val->intval = rt5033_get_charger_const_voltage(charger);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = RT5033_CHARGER_MODEL;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = RT5033_MANUFACTURER;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = (rt5033_get_charger_state(charger) ==
+ POWER_SUPPLY_STATUS_CHARGING);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct rt5033_charger_data *rt5033_charger_dt_init(
+ struct rt5033_charger *charger)
+{
+ struct rt5033_charger_data *chg;
+ struct power_supply_battery_info *info;
+ int ret;
+
+ chg = devm_kzalloc(charger->dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return ERR_PTR(-ENOMEM);
+
+ ret = power_supply_get_battery_info(charger->psy, &info);
+ if (ret)
+ return ERR_PTR(dev_err_probe(charger->dev, -EINVAL,
+ "missing battery info\n"));
+
+ /* Assign data. Validity will be checked in the init functions. */
+ chg->pre_uamp = info->precharge_current_ua;
+ chg->fast_uamp = info->constant_charge_current_max_ua;
+ chg->eoc_uamp = info->charge_term_current_ua;
+ chg->pre_uvolt = info->precharge_voltage_max_uv;
+ chg->const_uvolt = info->constant_charge_voltage_max_uv;
+
+ return chg;
+}
+
+static const struct power_supply_desc rt5033_charger_desc = {
+ .name = "rt5033-charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = rt5033_charger_props,
+ .num_properties = ARRAY_SIZE(rt5033_charger_props),
+ .get_property = rt5033_charger_get_property,
+};
+
+static int rt5033_charger_probe(struct platform_device *pdev)
+{
+ struct rt5033_charger *charger;
+ struct power_supply_config psy_cfg = {};
+ int ret;
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, charger);
+ charger->dev = &pdev->dev;
+ charger->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = charger;
+
+ charger->psy = devm_power_supply_register(&pdev->dev,
+ &rt5033_charger_desc,
+ &psy_cfg);
+ if (IS_ERR(charger->psy))
+ return dev_err_probe(&pdev->dev, PTR_ERR(charger->psy),
+ "Failed to register power supply\n");
+
+ charger->chg = rt5033_charger_dt_init(charger);
+ if (IS_ERR_OR_NULL(charger->chg))
+ return PTR_ERR(charger->chg);
+
+ ret = rt5033_charger_reg_init(charger);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct platform_device_id rt5033_charger_id[] = {
+ { "rt5033-charger", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, rt5033_charger_id);
+
+static const struct of_device_id rt5033_charger_of_match[] = {
+ { .compatible = "richtek,rt5033-charger", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rt5033_charger_of_match);
+
+static struct platform_driver rt5033_charger_driver = {
+ .driver = {
+ .name = "rt5033-charger",
+ .of_match_table = rt5033_charger_of_match,
+ },
+ .probe = rt5033_charger_probe,
+ .id_table = rt5033_charger_id,
+};
+module_platform_driver(rt5033_charger_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 charger driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL v2");
projects / linux.git / commitdiff