i2c: st: remove printout on handled timeouts

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>

diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index ce2333408904bdceccf55877c2b572481194e11d..dbb93394ff94625ba6e4a354a08c224692befa47 100644 (file)
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -689,11 +689,8 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
                        i2c_dev->adap.timeout);
        ret = c->result;
 
-       if (!timeout) {
-               dev_err(i2c_dev->dev, "Write to slave 0x%x timed out\n",
-                               c->addr);
+       if (!timeout)
                ret = -ETIMEDOUT;
-       }
 
        i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
        st_i2c_clr_bits(i2c_dev->base + SSC_I2C, i2c);