arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1

Add properties for spi3 and spi8 available on the stm32mp257f-ev1.
Both are kept disabled since only used via the gpio expansion connector.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 0ea8e69bfb3d369f9928661f40bd06be57a2192e..27b7360e5dbaf88dfd051d2dc5b1cc1da8ca0faf 100644 (file)
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -88,6 +88,20 @@
        status = "okay";
 };
 
+&spi3 {
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&spi3_pins_a>;
+       pinctrl-1 = <&spi3_sleep_pins_a>;
+       status = "disabled";
+};
+
+&spi8 {
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&spi8_pins_a>;
+       pinctrl-1 = <&spi8_sleep_pins_a>;
+       status = "disabled";
+};
+
 &usart2 {
        pinctrl-names = "default", "idle", "sleep";
        pinctrl-0 = <&usart2_pins_a>;