arm64: dts: apple: t8103: Add cd321x nodes

All M1 Mac devices have 2 SoC connected USB-C ports and use cd321x USB
type C port switch and power deliver controllers. I2c bus and addresses
configuration are for all devices equal.
The iMac (24-inch, 2021) has a configuration with 2 additional USB-C
ports (j456) using two additional cd321x controllers.

Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>

diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 7267e069355b15bd70e70ac0aa72072393ace4f8..884fddf7d36373fd5a97b9577f9ceeaf4c633700 100644 (file)
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -21,6 +21,24 @@
        };
 };
 
+&i2c0 {
+       hpm2: usb-pd@3b {
+               compatible = "apple,cd321x";
+               reg = <0x3b>;
+               interrupt-parent = <&pinctrl_ap>;
+               interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-names = "irq";
+       };
+
+       hpm3: usb-pd@3c {
+               compatible = "apple,cd321x";
+               reg = <0x3c>;
+               interrupt-parent = <&pinctrl_ap>;
+               interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-names = "irq";
+       };
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader

diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index 53d22b434d76cf886936606be61ef8dfd751377a..876278fe0afe6d88a4b245e7cea749a04cf0cea1 100644 (file)
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -39,6 +39,24 @@
        status = "okay";
 };
 
+&i2c0 {
+       hpm0: usb-pd@38 {
+               compatible = "apple,cd321x";
+               reg = <0x38>;
+               interrupt-parent = <&pinctrl_ap>;
+               interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-names = "irq";
+       };
+
+       hpm1: usb-pd@3f {
+               compatible = "apple,cd321x";
+               reg = <0x3f>;
+               interrupt-parent = <&pinctrl_ap>;
+               interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-names = "irq";
+       };
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader