ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices

The SAW2 device should describe the regulator constraints rather than
just declaring that it has the regulator.

Drop the 'regulator' property. If/when CPU voltage scaling is
implemented for this platform, proper regulator nodes show be added
instead.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-21-0472ec237f49@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 62fe7304fc9a773ac31a37edd14bfcec11f7eca1..681cb3fc8085dfd6ab9fe89daa0de281c157f641 100644 (file)
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -353,31 +353,26 @@
                saw0: power-manager@b089000 {
                        compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
                        reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-                       regulator;
                };
 
                saw1: power-manager@b099000 {
                        compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
                        reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-                       regulator;
                };
 
                saw2: power-manager@b0a9000 {
                        compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
                        reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-                       regulator;
                };
 
                saw3: power-manager@b0b9000 {
                        compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
                        reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-                       regulator;
                };
 
                saw_l2: power-manager@b012000 {
                        compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2";
                        reg = <0xb012000 0x1000>;
-                       regulator;
                };
 
                blsp1_uart1: serial@78af000 {