scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values

Improves readability of qla_mbx.c.

Link: https://lore.kernel.org/r/20200805200546.22497-1-ematsumiya@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 73883435ab587b008446ce919702f48ed19e6da0..77e1e24125cab896d514e736f38ddb14f15115b2 100644 (file)
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -5240,7 +5240,7 @@ qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data)
        mcp->mb[8] = MSW(risc_addr);
        mcp->out_mb = MBX_8|MBX_1|MBX_0;
        mcp->in_mb = MBX_3|MBX_2|MBX_0;
-       mcp->tov = 30;
+       mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(vha, mcp);
        if (rval != QLA_SUCCESS) {
@@ -5428,7 +5428,7 @@ qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
        mcp->mb[8] = MSW(risc_addr);
        mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_1|MBX_0;
-       mcp->tov = 30;
+       mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(vha, mcp);
        if (rval != QLA_SUCCESS) {
@@ -5700,7 +5700,7 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
        mcp->mb[9] = vha->vp_idx;
        mcp->out_mb = MBX_9|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
        mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0;
-       mcp->tov = 30;
+       mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
        rval = qla2x00_mailbox_command(vha, mcp);
        if (mb != NULL) {
@@ -5787,7 +5787,7 @@ qla82xx_mbx_intr_enable(scsi_qla_host_t *vha)
 
        mcp->out_mb = MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
-       mcp->tov = 30;
+       mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
 
        rval = qla2x00_mailbox_command(vha, mcp);
@@ -5822,7 +5822,7 @@ qla82xx_mbx_intr_disable(scsi_qla_host_t *vha)
 
        mcp->out_mb = MBX_1|MBX_0;
        mcp->in_mb = MBX_0;
-       mcp->tov = 30;
+       mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
 
        rval = qla2x00_mailbox_command(vha, mcp);
@@ -6014,7 +6014,7 @@ qla81xx_set_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg)
        if (IS_QLA8031(ha))
                mcp->out_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
        mcp->in_mb = MBX_0;
-       mcp->tov = 30;
+       mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
 
        rval = qla2x00_mailbox_command(vha, mcp);
@@ -6050,7 +6050,7 @@ qla81xx_get_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg)
        mcp->in_mb = MBX_2|MBX_1|MBX_0;
        if (IS_QLA8031(ha))
                mcp->in_mb |= MBX_6|MBX_5|MBX_4|MBX_3;
-       mcp->tov = 30;
+       mcp->tov = MBX_TOV_SECONDS;
        mcp->flags = 0;
 
        rval = qla2x00_mailbox_command(vha, mcp);