ARM: dts: msm8974: Introduce the wcnss remoteproc node

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20191104212302.105469-1-luca@z3ntu.xyz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 902e26b4960e096a3ef67d60e2af37498661f509..e8f4f37d533d6e86109e81f30d6f16cae27cb7ad 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -31,7 +31,7 @@
                        no-map;
                };
 
-               reserved@d200000 {
+               wcnss_region: wcnss@d200000 {
                        reg = <0x0d200000 0xa00000>;
                        no-map;
                };
@@ -796,6 +796,70 @@
                        clock-names = "core";
                };
 
+               pronto: remoteproc@fb21b000 {
+                       compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+                       reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+                       reg-names = "ccu", "dxe", "pmu";
+
+                       memory-region = <&wcnss_region>;
+
+                       interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+                                             <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+                       vddpx-supply = <&pm8941_s3>;
+
+                       qcom,smem-states = <&wcnss_smp2p_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       iris {
+                               compatible = "qcom,wcn3680";
+
+                               clocks = <&rpmcc RPM_SMD_CXO_A2>;
+                               clock-names = "xo";
+
+                               vddxo-supply = <&pm8941_l6>;
+                               vddrfa-supply = <&pm8941_l11>;
+                               vddpa-supply = <&pm8941_l19>;
+                               vdddig-supply = <&pm8941_s3>;
+                       };
+
+                       smd-edge {
+                               interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+                               qcom,ipc = <&apcs 8 17>;
+                               qcom,smd-edge = <6>;
+
+                               wcnss {
+                                       compatible = "qcom,wcnss";
+                                       qcom,smd-channels = "WCNSS_CTRL";
+                                       status = "disabled";
+
+                                       qcom,mmio = <&pronto>;
+
+                                       bt {
+                                               compatible = "qcom,wcnss-bt";
+                                       };
+
+                                       wifi {
+                                               compatible = "qcom,wcnss-wlan";
+
+                                               interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+                                                            <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+                                               interrupt-names = "tx", "rx";
+
+                                               qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+                                               qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+                                       };
+                               };
+                       };
+               };
+
                msmgpio: pinctrl@fd510000 {
                        compatible = "qcom,msm8974-pinctrl";
                        reg = <0xfd510000 0x4000>;