ARM: dts: am57xx: cl-som-am57x: skip resetting ETH PHYs

ETH PHYs setup on CL-SOM-AM57X is established in U-Boot along with
bringing them out of reset. This is done by toggling GPIOs belonging
to GPIO2/3 controllers on AM57xx.

Skip resetting ETH PHYs, by adding "ti,no-reset-on-init" to GPIO2/3
controllers DT nodes.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index b2c44515f62dcd2bc8d62c9fafff7cfce24cc715..c53882643ae96b6da8b15c6a26e5fd93ba3300cb 100644 (file)
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -605,3 +605,13 @@
                1 2 0 0
        >;
 };
+
+&gpio3 {
+       status = "okay";
+       ti,no-reset-on-init;
+};
+
+&gpio2 {
+       status = "okay";
+       ti,no-reset-on-init;
+};