}
 }
 
-static int iwl_apm_stop_master(struct iwl_priv *priv)
-{
-       int ret = 0;
-
-       /* stop device's busmaster DMA activity */
-       iwl_set_bit(trans(priv), CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
-
-       ret = iwl_poll_bit(trans(priv), CSR_RESET,
-                       CSR_RESET_REG_FLAG_MASTER_DISABLED,
-                       CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-       if (ret)
-               IWL_WARN(priv, "Master Disable Timed Out, 100 usec\n");
-
-       IWL_DEBUG_INFO(priv, "stop master\n");
-
-       return ret;
-}
-
-void iwl_apm_stop(struct iwl_priv *priv)
-{
-       IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n");
-
-       clear_bit(STATUS_DEVICE_ENABLED, &priv->shrd->status);
-
-       /* Stop device's DMA activity */
-       iwl_apm_stop_master(priv);
-
-       /* Reset the entire device */
-       iwl_set_bit(trans(priv), CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-       udelay(10);
-
-       /*
-        * Clear "initialization complete" bit to move adapter from
-        * D0A* (powered-up Active) --> D0U* (Uninitialized) state.
-        */
-       iwl_clear_bit(trans(priv), CSR_GP_CNTRL,
-                     CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-}
-
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 {
        int ret;
 
        return ret;
 }
 
+static int iwl_apm_stop_master(struct iwl_trans *trans)
+{
+       int ret = 0;
+
+       /* stop device's busmaster DMA activity */
+       iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
+
+       ret = iwl_poll_bit(trans, CSR_RESET,
+                       CSR_RESET_REG_FLAG_MASTER_DISABLED,
+                       CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
+       if (ret)
+               IWL_WARN(trans, "Master Disable Timed Out, 100 usec\n");
+
+       IWL_DEBUG_INFO(trans, "stop master\n");
+
+       return ret;
+}
+
+static void iwl_apm_stop(struct iwl_trans *trans)
+{
+       IWL_DEBUG_INFO(trans, "Stop card, put in low power state\n");
+
+       clear_bit(STATUS_DEVICE_ENABLED, &trans->shrd->status);
+
+       /* Stop device's DMA activity */
+       iwl_apm_stop_master(trans);
+
+       /* Reset the entire device */
+       iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+       udelay(10);
+
+       /*
+        * Clear "initialization complete" bit to move adapter from
+        * D0A* (powered-up Active) --> D0U* (Uninitialized) state.
+        */
+       iwl_clear_bit(trans, CSR_GP_CNTRL,
+                     CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+}
+
 static int iwl_nic_init(struct iwl_trans *trans)
 {
        unsigned long flags;
                        CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 
        /* Stop the device, and put it in low power state */
-       iwl_apm_stop(priv(trans));
+       iwl_apm_stop(trans);
 
        /* Upon stop, the APM issues an interrupt if HW RF kill is set.
         * Clean again the interrupt here
        return err;
 }
 
+static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans)
+{
+       iwl_apm_stop(trans);
+
+       /* Even if we stop the HW, we still want the RF kill interrupt */
+       IWL_DEBUG_ISR(trans, "Enabling rfkill interrupt\n");
+       iwl_write32(trans, CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
+}
+
 static int iwl_trans_pcie_reclaim(struct iwl_trans *trans, int sta_id, int tid,
                      int txq_id, int ssn, u32 status,
                      struct sk_buff_head *skbs)
         * things already :-)
         */
        if (!trans->shrd->wowlan) {
-               iwl_apm_stop(priv(trans));
+               iwl_apm_stop(trans);
        } else {
                iwl_disable_interrupts(trans);
                iwl_clear_bit(trans, CSR_GP_CNTRL,
 
 const struct iwl_trans_ops trans_ops_pcie = {
        .start_hw = iwl_trans_pcie_start_hw,
+       .stop_hw = iwl_trans_pcie_stop_hw,
        .fw_alive = iwl_trans_pcie_fw_alive,
        .start_device = iwl_trans_pcie_start_device,
        .stop_device = iwl_trans_pcie_stop_device,
 
 /**
  * struct iwl_trans_ops - transport specific operations
  * @start_hw: starts the HW- from that point on, the HW can send interrupts
+ * @stop_hw: stops the HW- from that point on, the HW will be in low power but
+ *     will still issue interrupt if the HW RF kill is triggered.
  * @start_device: allocates and inits all the resources for the transport
  *                layer.
  * @fw_alive: called when the fw sends alive notification
 struct iwl_trans_ops {
 
        int (*start_hw)(struct iwl_trans *iwl_trans);
+       void (*stop_hw)(struct iwl_trans *iwl_trans);
        int (*start_device)(struct iwl_trans *trans);
        void (*fw_alive)(struct iwl_trans *trans);
        void (*stop_device)(struct iwl_trans *trans);
        return trans->ops->start_hw(trans);
 }
 
+static inline void iwl_trans_stop_hw(struct iwl_trans *trans)
+{
+       trans->ops->stop_hw(trans);
+}
+
 static inline void iwl_trans_fw_alive(struct iwl_trans *trans)
 {
        trans->ops->fw_alive(trans);