net/mlx5: Fix a WARN upon a callback command failure

The below WARN [1] is reported once a callback command failed.

As a callback runs under an interrupt context, needs to use the IRQ
save/restore variant.

[1]
DEBUG_LOCKS_WARN_ON(lockdep_hardirq_context())
WARNING: CPU: 15 PID: 0 at kernel/locking/lockdep.c:4353
              lockdep_hardirqs_on_prepare+0x11b/0x180
Modules linked in: vhost_net vhost tap mlx5_vfio_pci
vfio_pci vfio_pci_core vfio_iommu_type1 vfio mlx5_vdpa vringh
vhost_iotlb vdpa nfnetlink_cttimeout openvswitch nsh ip6table_mangle
ip6table_nat ip6table_filter ip6_tables iptable_mangle
xt_conntrackxt_MASQUERADE nf_conntrack_netlink nfnetlink
xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5
auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi
scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm
mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 15 PID: 0 Comm: swapper/15 Tainted: G        W 6.7.0-rc4+ #1587
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockdep_hardirqs_on_prepare+0x11b/0x180
Code: 00 5b c3 c3 e8 e6 0d 58 00 85 c0 74 d6 8b 15 f0 c3
      76 01 85 d2 75 cc 48 c7 c6 04 a5 3b 82 48 c7 c7 f1
      e9 39 82 e8 95 12 f9 ff <0f> 0b 5b c3 e8 bc 0d 58 00
      85 c0 74 ac 8b 3d c6 c3 76 01 85 ff 75
RSP: 0018:ffffc900003ecd18 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: 0000000000000000 RSI: ffff88885fbdb880 RDI: ffff88885fbdb888
RBP: 00000000ffffff87 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 284e4f5f4e524157 R12: 00000000002c9aa1
R13: ffff88810aace980 R14: ffff88810aace9b8 R15: 0000000000000003
FS:  0000000000000000(0000) GS:ffff88885fbc0000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f731436f4c8 CR3: 000000010aae6001 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
? __warn+0x81/0x170
? lockdep_hardirqs_on_prepare+0x11b/0x180
? report_bug+0xf8/0x1c0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? lockdep_hardirqs_on_prepare+0x11b/0x180
? lockdep_hardirqs_on_prepare+0x11b/0x180
trace_hardirqs_on+0x4a/0xa0
raw_spin_unlock_irq+0x24/0x30
cmd_status_err+0xc0/0x1a0 [mlx5_core]
cmd_status_err+0x1a0/0x1a0 [mlx5_core]
mlx5_cmd_exec_cb_handler+0x24/0x40 [mlx5_core]
mlx5_cmd_comp_handler+0x129/0x4b0 [mlx5_core]
cmd_comp_notifier+0x1a/0x20 [mlx5_core]
notifier_call_chain+0x3e/0xe0
atomic_notifier_call_chain+0x5f/0x130
mlx5_eq_async_int+0xe7/0x200 [mlx5_core]
notifier_call_chain+0x3e/0xe0
atomic_notifier_call_chain+0x5f/0x130
irq_int_handler+0x11/0x20 [mlx5_core]
__handle_irq_event_percpu+0x99/0x220
? tick_irq_enter+0x5d/0x80
handle_irq_event_percpu+0xf/0x40
handle_irq_event+0x3a/0x60
handle_edge_irq+0xa2/0x1c0
__common_interrupt+0x55/0x140
common_interrupt+0x7d/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0x13/0x20
Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff
ff ff cc cc cc cc 8b 05 ea 08 25 01 85 c0 7e 07 0f 00 2d 7f b0 26 00 fb
f4 <fa> c3 90 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 80 d0 02 00
RSP: 0018:ffffc9000010fec8 EFLAGS: 00000242
RAX: 0000000000000001 RBX: 000000000000000f RCX: 4000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff811c410c
RBP: ffffffff829478c0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? do_idle+0x1ec/0x210
default_idle_call+0x6c/0x90
do_idle+0x1ec/0x210
cpu_startup_entry+0x26/0x30
start_secondary+0x11b/0x150
secondary_startup_64_no_verify+0x165/0x16b
</TASK>
irq event stamp: 833284
hardirqs last  enabled at (833283): [<ffffffff811c410c>]
do_idle+0x1ec/0x210
hardirqs last disabled at (833284): [<ffffffff81daf9ef>]
common_interrupt+0xf/0xa0
softirqs last  enabled at (833224): [<ffffffff81dc199f>]
__do_softirq+0x2bf/0x40e
softirqs last disabled at (833177): [<ffffffff81178ddf>]
irq_exit_rcu+0x7f/0xa0

Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index a7b1f9686c09a9a0d6370ee85e3cc33d8b4cd302..4957412ff1f65a8d0621410127d7d58d1cdd175f 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1923,6 +1923,7 @@ static void cmd_status_log(struct mlx5_core_dev *dev, u16 opcode, u8 status,
 {
        const char *namep = mlx5_command_str(opcode);
        struct mlx5_cmd_stats *stats;
+       unsigned long flags;
 
        if (!err || !(strcmp(namep, "unknown command opcode")))
                return;
@@ -1930,7 +1931,7 @@ static void cmd_status_log(struct mlx5_core_dev *dev, u16 opcode, u8 status,
        stats = xa_load(&dev->cmd.stats, opcode);
        if (!stats)
                return;
-       spin_lock_irq(&stats->lock);
+       spin_lock_irqsave(&stats->lock, flags);
        stats->failed++;
        if (err < 0)
                stats->last_failed_errno = -err;
@@ -1939,7 +1940,7 @@ static void cmd_status_log(struct mlx5_core_dev *dev, u16 opcode, u8 status,
                stats->last_failed_mbox_status = status;
                stats->last_failed_syndrome = syndrome;
        }
-       spin_unlock_irq(&stats->lock);
+       spin_unlock_irqrestore(&stats->lock, flags);
 }
 
 /* preserve -EREMOTEIO for outbox.status != OK, otherwise return err as is */