Staging/bcm: Fix whitespace/comments in Ioctl.h

Cleanup whitespace and comments in Ioctl.h in a few ways:
- > 80 character cleanup
- Comment clarification
- More consistent vertical alignment

Signed-off-by: Martin Kelly <martkell@amazon.com>
Reviewed-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h
index 797f862b90cf7b571628ab0f1fb89d61512a3269..fa5f8671612ea6112e7c7a485cf98bb63475679e 100644 (file)
--- a/drivers/staging/bcm/Ioctl.h
+++ b/drivers/staging/bcm/Ioctl.h
@@ -87,9 +87,9 @@ struct bcm_user_thread_req {
 #define IOCTL_BCM_FLASH2X_SECTION_WRITE                _IOW(BCM_IOCTL, 0x866, int)
 #define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP   _IOR(BCM_IOCTL, 0x867, int)
 #define IOCTL_BCM_SET_ACTIVE_SECTION           _IOW(BCM_IOCTL, 0x868, int)
-#define        IOCTL_BCM_IDENTIFY_ACTIVE_SECTION       _IO(BCM_IOCTL, 0x869)
+#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION      _IO(BCM_IOCTL, 0x869)
 #define IOCTL_BCM_COPY_SECTION                 _IOW(BCM_IOCTL, 0x870, int)
-#define        IOCTL_BCM_GET_FLASH_CS_INFO             _IOR(BCM_IOCTL, 0x871, int)
+#define IOCTL_BCM_GET_FLASH_CS_INFO            _IOR(BCM_IOCTL, 0x871, int)
 #define IOCTL_BCM_SELECT_DSD                   _IOW(BCM_IOCTL, 0x872, int)
 #define IOCTL_BCM_NVM_RAW_READ                 _IOR(BCM_IOCTL, 0x875, int)
 #define IOCTL_BCM_CNTRLMSG_MASK                        _IOW(BCM_IOCTL, 0x874, int)
@@ -130,7 +130,7 @@ struct bcm_bulk_wrm_buffer {
 };
 
 enum bcm_flash2x_section_val {
-       NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
+       NO_SECTION_VAL = 0, /* no section chosen when absolute offset is given for RD/WR */
        ISO_IMAGE1,
        ISO_IMAGE2,
        DSD0,
@@ -152,11 +152,11 @@ enum bcm_flash2x_section_val {
  * Structure used for READ/WRITE Flash Map2.x
  */
 struct bcm_flash2x_readwrite {
-       enum bcm_flash2x_section_val Section; /* which section has to be read/written */
-       u32 offset;          /* Offset within Section. */
-       u32 numOfBytes;      /* NOB from the offset */
+       enum bcm_flash2x_section_val Section; /* section to be read/written */
+       u32 offset; /* offset within section. */
+       u32 numOfBytes; /* number of bytes from the offset */
        u32 bVerify;
-       void __user *pDataBuff;      /* Buffer for reading/writing */
+       void __user *pDataBuff; /* buffer for reading/writing */
 };
 
 /*
@@ -207,20 +207,20 @@ struct bcm_time_elapsed {
 };
 
 enum {
-       WIMAX_IDX = 0,  /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
-       HOST_IDX,       /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+       WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+       HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
        MAX_IDX
 };
 
 struct bcm_gpio_multi_info {
        unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
-       unsigned int uiGPIOMask;    /* set the correspondig bit to 1 to access GPIO */
-       unsigned int uiGPIOValue;   /* 0 or 1; value to be set when command is 1. */
+       unsigned int uiGPIOMask; /* set the corresponding bit to 1 to access GPIO */
+       unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
 } __packed;
 
 struct bcm_gpio_multi_mode {
-       unsigned int uiGPIOMode;    /* 1 for OUT mode, 0 for IN mode */
-       unsigned int uiGPIOMask;    /* GPIO mask to set mode */
+       unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
+       unsigned int uiGPIOMask; /* GPIO mask to set mode */
 } __packed;
 
 #endif