# This tests nf_queue:
# 1. can process packets from all hooks
# 2. support running nfqueue from more than one base chain
+#
+# shellcheck disable=SC2162,SC2317
source lib.sh
ret=0
cleanup()
{
- ip netns pids ${ns1} | xargs kill 2>/dev/null
- ip netns pids ${ns2} | xargs kill 2>/dev/null
- ip netns pids ${nsrouter} | xargs kill 2>/dev/null
+ ip netns pids "$ns1" | xargs kill 2>/dev/null
+ ip netns pids "$ns2" | xargs kill 2>/dev/null
+ ip netns pids "$nsrouter" | xargs kill 2>/dev/null
cleanup_all_ns
rm -f "$TMPFILE2" "$TMPFILE3"
}
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
- echo "SKIP: Could not run test without nft tool"
- exit $ksft_skip
-fi
+checktool "nft --version" "test without nft tool"
trap cleanup EXIT
TMPFILE3=$(mktemp)
TMPINPUT=$(mktemp)
-dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$TMPINPUT
+dd conv=sparse status=none if=/dev/zero bs=1M count=200 of="$TMPINPUT"
-ip link add veth0 netns ${nsrouter} type veth peer name eth0 netns ${ns1} > /dev/null 2>&1
-if [ $? -ne 0 ];then
+if ! ip link add veth0 netns "$nsrouter" type veth peer name eth0 netns "$ns1" > /dev/null 2>&1; then
echo "SKIP: No virtual ethernet pair device support in kernel"
exit $ksft_skip
fi
-ip link add veth1 netns ${nsrouter} type veth peer name eth0 netns ${ns2}
+ip link add veth1 netns "$nsrouter" type veth peer name eth0 netns "$ns2"
-ip -net ${nsrouter} link set veth0 up
-ip -net ${nsrouter} addr add 10.0.1.1/24 dev veth0
-ip -net ${nsrouter} addr add dead:1::1/64 dev veth0 nodad
+ip -net "$nsrouter" link set veth0 up
+ip -net "$nsrouter" addr add 10.0.1.1/24 dev veth0
+ip -net "$nsrouter" addr add dead:1::1/64 dev veth0 nodad
-ip -net ${nsrouter} link set veth1 up
-ip -net ${nsrouter} addr add 10.0.2.1/24 dev veth1
-ip -net ${nsrouter} addr add dead:2::1/64 dev veth1 nodad
+ip -net "$nsrouter" link set veth1 up
+ip -net "$nsrouter" addr add 10.0.2.1/24 dev veth1
+ip -net "$nsrouter" addr add dead:2::1/64 dev veth1 nodad
-ip -net ${ns1} link set eth0 up
-ip -net ${ns2} link set eth0 up
+ip -net "$ns1" link set eth0 up
+ip -net "$ns2" link set eth0 up
-ip -net ${ns1} addr add 10.0.1.99/24 dev eth0
-ip -net ${ns1} addr add dead:1::99/64 dev eth0 nodad
-ip -net ${ns1} route add default via 10.0.1.1
-ip -net ${ns1} route add default via dead:1::1
+ip -net "$ns1" addr add 10.0.1.99/24 dev eth0
+ip -net "$ns1" addr add dead:1::99/64 dev eth0 nodad
+ip -net "$ns1" route add default via 10.0.1.1
+ip -net "$ns1" route add default via dead:1::1
-ip -net ${ns2} addr add 10.0.2.99/24 dev eth0
-ip -net ${ns2} addr add dead:2::99/64 dev eth0 nodad
-ip -net ${ns2} route add default via 10.0.2.1
-ip -net ${ns2} route add default via dead:2::1
+ip -net "$ns2" addr add 10.0.2.99/24 dev eth0
+ip -net "$ns2" addr add dead:2::99/64 dev eth0 nodad
+ip -net "$ns2" route add default via 10.0.2.1
+ip -net "$ns2" route add default via dead:2::1
load_ruleset() {
local name=$1
local prio=$2
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
table inet $name {
chain nfq {
ip protocol icmp queue bypass
load_counter_ruleset() {
local prio=$1
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
table inet countrules {
chain pre {
type filter hook prerouting priority $prio; policy accept;
}
test_ping() {
- ip netns exec ${ns1} ping -c 1 -q 10.0.2.99 > /dev/null
- if [ $? -ne 0 ];then
+ if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.99 > /dev/null; then
return 1
fi
- ip netns exec ${ns1} ping -c 1 -q dead:2::99 > /dev/null
- if [ $? -ne 0 ];then
+ if ! ip netns exec "$ns1" ping -c 1 -q dead:2::99 > /dev/null; then
return 2
fi
}
test_ping_router() {
- ip netns exec ${ns1} ping -c 1 -q 10.0.2.1 > /dev/null
- if [ $? -ne 0 ];then
+ if ! ip netns exec "$ns1" ping -c 1 -q 10.0.2.1 > /dev/null; then
return 3
fi
- ip netns exec ${ns1} ping -c 1 -q dead:2::1 > /dev/null
- if [ $? -ne 0 ];then
+ if ! ip netns exec "$ns1" ping -c 1 -q dead:2::1 > /dev/null; then
return 4
fi
test_queue_blackhole() {
local proto=$1
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
table $proto blackh {
chain forward {
type filter hook forward priority 0; policy accept;
}
}
EOF
- if [ $proto = "ip" ] ;then
- ip netns exec ${ns1} ping -W 2 -c 1 -q 10.0.2.99 > /dev/null
+ if [ "$proto" = "ip" ] ;then
+ ip netns exec "$ns1" ping -W 2 -c 1 -q 10.0.2.99 > /dev/null
lret=$?
- elif [ $proto = "ip6" ]; then
- ip netns exec ${ns1} ping -W 2 -c 1 -q dead:2::99 > /dev/null
+ elif [ "$proto" = "ip6" ]; then
+ ip netns exec "$ns1" ping -W 2 -c 1 -q dead:2::99 > /dev/null
lret=$?
else
lret=111
fi
# queue without bypass keyword should drop traffic if no listener exists.
- if [ $lret -eq 0 ];then
+ if [ "$lret" -eq 0 ];then
echo "FAIL: $proto expected failure, got $lret" 1>&2
exit 1
fi
- ip netns exec ${nsrouter} nft delete table $proto blackh
- if [ $? -ne 0 ] ;then
+ if ! ip netns exec "$nsrouter" nft delete table "$proto" blackh; then
echo "FAIL: $proto: Could not delete blackh table"
exit 1
fi
echo "PASS: $proto: statement with no listener results in packet drop"
}
+nf_queue_wait()
+{
+ local procfile="/proc/self/net/netfilter/nfnetlink_queue"
+ local netns id
+
+ netns="$1"
+ id="$2"
+
+ # if this file doesn't exist, nfnetlink_module isn't loaded.
+ # rather than loading it ourselves, wait for kernel module autoload
+ # completion, nfnetlink should do so automatically because nf_queue
+ # helper program, spawned in the background, asked for this functionality.
+ test -f "$procfile" &&
+ ip netns exec "$netns" cat "$procfile" | grep -q "^ *$id "
+}
+
test_queue()
{
- local expected=$1
+ local expected="$1"
local last=""
# spawn nf_queue listeners
- ip netns exec ${nsrouter} ./nf_queue -c -q 0 -t $timeout > "$TMPFILE0" &
- ip netns exec ${nsrouter} ./nf_queue -c -q 1 -t $timeout > "$TMPFILE1" &
- sleep 1
- test_ping
- ret=$?
- if [ $ret -ne 0 ];then
- echo "FAIL: netns routing/connectivity with active listener on queue $queue: $ret" 1>&2
+ ip netns exec "$nsrouter" ./nf_queue -c -q 0 -t $timeout > "$TMPFILE0" &
+ ip netns exec "$nsrouter" ./nf_queue -c -q 1 -t $timeout > "$TMPFILE1" &
+
+ busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 0
+ busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 1
+
+ if ! test_ping;then
+ echo "FAIL: netns routing/connectivity with active listener on queues 0 and 1: $ret" 1>&2
exit $ret
fi
- test_ping_router
- ret=$?
- if [ $ret -ne 0 ];then
- echo "FAIL: netns router unreachable listener on queue $queue: $ret" 1>&2
+ if ! test_ping_router;then
+ echo "FAIL: netns router unreachable listener on queue 0 and 1: $ret" 1>&2
exit $ret
fi
last=$(tail -n1 "$file")
if [ x"$last" != x"$expected packets total" ]; then
echo "FAIL: Expected $expected packets total, but got $last" 1>&2
- cat "$file" 1>&2
-
- ip netns exec ${nsrouter} nft list ruleset
+ ip netns exec "$nsrouter" nft list ruleset
exit 1
fi
done
test_tcp_forward()
{
- ip netns exec ${nsrouter} ./nf_queue -q 2 -t $timeout &
+ ip netns exec "$nsrouter" ./nf_queue -q 2 -t "$timeout" &
local nfqpid=$!
- timeout 5 ip netns exec ${ns2} socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
+ timeout 5 ip netns exec "$ns2" socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
local rpid=$!
- busywait $BUSYWAIT_TIMEOUT listener_ready ${ns2}
-
- ip netns exec ${ns1} socat -u STDIN TCP:10.0.2.99:12345 <"$TMPINPUT" >/dev/null
+ busywait "$BUSYWAIT_TIMEOUT" listener_ready "$ns2"
- wait $rpid
+ ip netns exec "$ns1" socat -u STDIN TCP:10.0.2.99:12345 <"$TMPINPUT" >/dev/null
- [ $? -eq 0 ] && echo "PASS: tcp and nfqueue in forward chain"
+ wait "$rpid" && echo "PASS: tcp and nfqueue in forward chain"
}
test_tcp_localhost()
{
- dd conv=sparse status=none if=/dev/zero bs=1M count=200 of=$TMPINPUT
- timeout 5 ip netns exec ${nsrouter} socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
+ dd conv=sparse status=none if=/dev/zero bs=1M count=200 of="$TMPINPUT"
+ timeout 5 ip netns exec "$nsrouter" socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
local rpid=$!
- ip netns exec ${nsrouter} ./nf_queue -q 3 -t $timeout &
+ ip netns exec "$nsrouter" ./nf_queue -q 3 -t "$timeout" &
local nfqpid=$!
- busywait $BUSYWAIT_TIMEOUT listener_ready ${nsrouter}
+ busywait "$BUSYWAIT_TIMEOUT" listener_ready "$nsrouter"
- ip netns exec ${nsrouter} socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" >/dev/null
+ ip netns exec "$nsrouter" socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" >/dev/null
- wait $rpid
- [ $? -eq 0 ] && echo "PASS: tcp via loopback"
+ wait "$rpid" && echo "PASS: tcp via loopback"
wait 2>/dev/null
}
test_tcp_localhost_connectclose()
{
- ip netns exec ${nsrouter} ./connect_close -p 23456 -t $timeout &
+ ip netns exec "$nsrouter" ./connect_close -p 23456 -t "$timeout" &
+ ip netns exec "$nsrouter" ./nf_queue -q 3 -t "$timeout" &
- ip netns exec ${nsrouter} ./nf_queue -q 3 -t $timeout &
- local nfqpid=$!
-
- sleep 1
+ busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$nsrouter" 3
- wait $rpid
- [ $? -eq 0 ] && echo "PASS: tcp via loopback with connect/close"
+ wait && echo "PASS: tcp via loopback with connect/close"
wait 2>/dev/null
}
test_tcp_localhost_requeue()
{
-ip netns exec ${nsrouter} nft -f /dev/stdin <<EOF
+ip netns exec "$nsrouter" nft -f /dev/stdin <<EOF
flush ruleset
table inet filter {
chain output {
}
}
EOF
- timeout 5 ip netns exec ${nsrouter} socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
+ timeout 5 ip netns exec "$nsrouter" socat -u TCP-LISTEN:12345 STDOUT >/dev/null &
local rpid=$!
- ip netns exec ${nsrouter} ./nf_queue -c -q 1 -t $timeout > "$TMPFILE2" &
+ ip netns exec "$nsrouter" ./nf_queue -c -q 1 -t "$timeout" > "$TMPFILE2" &
# nfqueue 1 will be called via output hook. But this time,
# re-queue the packet to nfqueue program on queue 2.
- ip netns exec ${nsrouter} ./nf_queue -G -d 150 -c -q 0 -Q 1 -t $timeout > "$TMPFILE3" &
+ ip netns exec "$nsrouter" ./nf_queue -G -d 150 -c -q 0 -Q 1 -t "$timeout" > "$TMPFILE3" &
- busywait $BUSYWAIT_TIMEOUT listener_ready ${nsrouter}
- ip netns exec ${nsrouter} socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" > /dev/null
+ busywait "$BUSYWAIT_TIMEOUT" listener_ready "$nsrouter"
+ ip netns exec "$nsrouter" socat -u STDIN TCP:127.0.0.1:12345 <"$TMPINPUT" > /dev/null
wait
}
test_icmp_vrf() {
- ip -net $ns1 link add tvrf type vrf table 9876
- if [ $? -ne 0 ];then
+ if ! ip -net "$ns1" link add tvrf type vrf table 9876;then
echo "SKIP: Could not add vrf device"
return
fi
- ip -net $ns1 li set eth0 master tvrf
- ip -net $ns1 li set tvrf up
+ ip -net "$ns1" li set eth0 master tvrf
+ ip -net "$ns1" li set tvrf up
- ip -net $ns1 route add 10.0.2.0/24 via 10.0.1.1 dev eth0 table 9876
-ip netns exec ${ns1} nft -f /dev/stdin <<EOF
+ ip -net "$ns1" route add 10.0.2.0/24 via 10.0.1.1 dev eth0 table 9876
+ip netns exec "$ns1" nft -f /dev/stdin <<EOF
flush ruleset
table inet filter {
chain output {
}
}
EOF
- ip netns exec ${ns1} ./nf_queue -q 1 -t $timeout &
+ ip netns exec "$ns1" ./nf_queue -q 1 -t "$timeout" &
local nfqpid=$!
- sleep 1
- ip netns exec ${ns1} ip vrf exec tvrf ping -c 1 10.0.2.99 > /dev/null
+ busywait "$BUSYWAIT_TIMEOUT" nf_queue_wait "$ns1" 1
+
+ ip netns exec "$ns1" ip vrf exec tvrf ping -c 1 10.0.2.99 > /dev/null
for n in output post; do
for d in tvrf eth0; do
- ip netns exec ${ns1} nft list chain inet filter $n | grep -q "oifname \"$d\" icmp type echo-request counter packets 1"
- if [ $? -ne 0 ] ; then
+ if ! ip netns exec "$ns1" nft list chain inet filter "$n" | grep -q "oifname \"$d\" icmp type echo-request counter packets 1"; then
echo "FAIL: chain $n: icmp packet counter mismatch for device $d" 1>&2
- ip netns exec ${ns1} nft list ruleset
+ ip netns exec "$ns1" nft list ruleset
ret=1
return
fi
done
done
- wait $nfqpid
- [ $? -eq 0 ] && echo "PASS: icmp+nfqueue via vrf"
+ wait "$nfqpid" && echo "PASS: icmp+nfqueue via vrf"
wait 2>/dev/null
}
-ip netns exec ${nsrouter} sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
-ip netns exec ${nsrouter} sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null
+ip netns exec "$nsrouter" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null
load_ruleset "filter" 0
-test_ping
-ret=$?
-if [ $ret -eq 0 ];then
+if test_ping; then
# queue bypass works (rules were skipped, no listener)
echo "PASS: ${ns1} can reach ${ns2}"
else
projects / linux.git / commitdiff