arm64: dts: qcom: sm8550: add missing two RX Soundwire ports in configuration

The Qualcomm SM8550 RX Soundwire port configuration was taken from
downstream sources ("rx_frame_params_default"), but without two ports.
Correct the DTS, even though no practical impact was observed.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231212185415.228003-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 1c4db4a8eddae496277bf41cd738f80852be4d41..735ffd926777401c8c86c3b9f8623c04851af7bc 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2315,18 +2315,18 @@
                        clock-names = "iface";
                        label = "RX";
 
-                       qcom,din-ports = <0>;
-                       qcom,dout-ports = <10>;
-
-                       qcom,ports-sinterval =          /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-                       qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-                       qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-                       qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-                       qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-                       qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-                       qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-                       qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-                       qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+                       qcom,din-ports = <1>;
+                       qcom,dout-ports = <11>;
+
+                       qcom,ports-sinterval =          /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+                       qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
                        #address-cells = <2>;
                        #size-cells = <0>;