GRC_MODE_NO_TX_PHDR_CSUM |
                          GRC_MODE_NO_RX_PHDR_CSUM);
        tp->grc_mode |= GRC_MODE_HOST_SENDBDS;
-       if (tp->tg3_flags & TG3_FLAG_NO_TX_PSEUDO_CSUM)
-               tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
-       if (tp->tg3_flags & TG3_FLAG_NO_RX_PSEUDO_CSUM)
-               tp->grc_mode |= GRC_MODE_NO_RX_PHDR_CSUM;
+
+       /* Pseudo-header checksum is done by hardware logic and not
+        * the offload processers, so make the chip do the pseudo-
+        * header checksums on receive.  For transmit it is more
+        * convenient to do the pseudo-header checksum in software
+        * as Linux does that on transmit for us in all cases.
+        */
+       tp->grc_mode |= GRC_MODE_NO_TX_PHDR_CSUM;
 
        tw32(GRC_MODE,
             tp->grc_mode |
        if (tp->pci_chip_rev_id == CHIPREV_ID_5700_B0)
                tp->tg3_flags |= TG3_FLAG_BROKEN_CHECKSUMS;
 
-       /* Pseudo-header checksum is done by hardware logic and not
-        * the offload processers, so make the chip do the pseudo-
-        * header checksums on receive.  For transmit it is more
-        * convenient to do the pseudo-header checksum in software
-        * as Linux does that on transmit for us in all cases.
-        */
-       tp->tg3_flags |= TG3_FLAG_NO_TX_PSEUDO_CSUM;
-       tp->tg3_flags &= ~TG3_FLAG_NO_RX_PSEUDO_CSUM;
-
        /* Derive initial jumbo mode from MTU assigned in
         * ether_setup() via the alloc_etherdev() call
         */
 
 #define TG3_FLAG_PCIX_MODE             0x00020000
 #define TG3_FLAG_PCI_HIGH_SPEED                0x00040000
 #define TG3_FLAG_PCI_32BIT             0x00080000
-#define TG3_FLAG_NO_TX_PSEUDO_CSUM     0x00100000
-#define TG3_FLAG_NO_RX_PSEUDO_CSUM     0x00200000
 #define TG3_FLAG_SERDES_WOL_CAP                0x00400000
 #define TG3_FLAG_JUMBO_RING_ENABLE     0x00800000
 #define TG3_FLAG_10_100_ONLY           0x01000000