arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs

Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8211E PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be

diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index 801ea54b027c43d96a78ea29c3e7589a0ff15419..a69d24e9c61db052ffb625481980e59ead502818 100644 (file)
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -21,6 +21,8 @@
        status = "okay";
 
        phy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-id001c.c915",
+                            "ethernet-phy-ieee802.3-c22";
                reg = <0>;
                interrupt-parent = <&gpio2>;
                interrupts = <21 IRQ_TYPE_LEVEL_LOW>;

diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index dde3a07bc417c6906879f88bf8a80cb8ac9a8ae1..ad898c6db4e62df6f5ac1cee9c840a3c4570d121 100644 (file)
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -24,6 +24,8 @@
        status = "okay";
 
        phy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-id001c.c915",
+                            "ethernet-phy-ieee802.3-c22";
                reg = <0>;
                interrupt-parent = <&gpio2>;
                interrupts = <11 IRQ_TYPE_LEVEL_LOW>;