serial: max310x: Try to get crystal clock rate from property

In some configurations, mainly ACPI-based, the clock frequency of the device
is supplied by very well established 'clock-frequency' property. Hence, try
to get it from the property at last if no other providers are available.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210517172930.83353-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 8534d6e45a1d7b65c149a130526aa5314203b66b..b5d780fc16eb2c56c06d9c447e786b708344512f 100644 (file)
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -552,7 +552,7 @@ static int max310x_update_best_err(unsigned long f, long *besterr)
        return 1;
 }
 
-static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
+static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
                               unsigned long freq, bool xtal)
 {
        unsigned int div, clksrc, pllcfg = 0;
@@ -618,7 +618,7 @@ static int max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
                }
        }
 
-       return (int)bestfreq;
+       return bestfreq;
 }
 
 static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len)
@@ -1253,9 +1253,10 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype,
                         struct regmap *regmap, int irq)
 {
-       int i, ret, fmin, fmax, freq, uartclk;
+       int i, ret, fmin, fmax, freq;
        struct max310x_port *s;
-       bool xtal = false;
+       u32 uartclk = 0;
+       bool xtal;
 
        if (IS_ERR(regmap))
                return PTR_ERR(regmap);
@@ -1267,24 +1268,20 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
                return -ENOMEM;
        }
 
+       /* Always ask for fixed clock rate from a property. */
+       device_property_read_u32(dev, "clock-frequency", &uartclk);
+
        s->clk = devm_clk_get_optional(dev, "osc");
        if (IS_ERR(s->clk))
                return PTR_ERR(s->clk);
        if (s->clk) {
-               fmin = 500000;
-               fmax = 35000000;
+               xtal = false;
        } else {
                s->clk = devm_clk_get_optional(dev, "xtal");
                if (IS_ERR(s->clk))
                        return PTR_ERR(s->clk);
-               if (s->clk) {
-                       fmin = 1000000;
-                       fmax = 4000000;
-                       xtal = true;
-               } else {
-                       dev_err(dev, "Cannot get clock\n");
-                       return -EINVAL;
-               }
+
+               xtal = true;
        }
 
        ret = clk_prepare_enable(s->clk);
@@ -1292,6 +1289,21 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
                return ret;
 
        freq = clk_get_rate(s->clk);
+       if (freq == 0)
+               freq = uartclk;
+       if (freq == 0) {
+               dev_err(dev, "Cannot get clock rate\n");
+               return -EINVAL;
+       }
+
+       if (xtal) {
+               fmin = 1000000;
+               fmax = 4000000;
+       } else {
+               fmin = 500000;
+               fmax = 35000000;
+       }
+
        /* Check frequency limits */
        if (freq < fmin || freq > fmax) {
                ret = -ERANGE;