arm64: dts: qcom: pm8350c: stop depending on thermal_zones label

Most of SoC device trees do not provide the thermal_zones label. Thus
stop depending on it and use the full path to the thermal zones nodes.

Fixes: 3795fe7d497b ("arm64: dts: qcom: pm8350c: Add temp-alarm support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226205035.1826360-5-dmitry.baryshkov@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index e1b75ae0a8233b3d61cd8d79cbfdfc883d825850..9bc6464477bd69a28a23b2ef97cee8d5fcf4ccfe 100644 (file)
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -32,23 +32,25 @@
        };
 };
 
-&thermal_zones {
-       pm8350c_thermal: pm8350c-thermal {
-               polling-delay-passive = <100>;
-               polling-delay = <0>;
-               thermal-sensors = <&pm8350c_temp_alarm>;
+/ {
+       thermal-zones {
+               pm8350c_thermal: pm8350c-thermal {
+                       polling-delay-passive = <100>;
+                       polling-delay = <0>;
+                       thermal-sensors = <&pm8350c_temp_alarm>;
 
-               trips {
-                       pm8350c_trip0: trip0 {
-                               temperature = <95000>;
-                               hysteresis = <0>;
-                               type = "passive";
-                       };
+                       trips {
+                               pm8350c_trip0: trip0 {
+                                       temperature = <95000>;
+                                       hysteresis = <0>;
+                                       type = "passive";
+                               };
 
-                       pm8350c_crit: pm8350c-crit {
-                               temperature = <115000>;
-                               hysteresis = <0>;
-                               type = "critical";
+                               pm8350c_crit: pm8350c-crit {
+                                       temperature = <115000>;
+                                       hysteresis = <0>;
+                                       type = "critical";
+                               };
                        };
                };
        };