ARM: dts: renesas: blanche: Move Ethernet node to LBSC
authorGeert Uytterhoeven <geert+renesas@glider.be>
Thu, 31 Aug 2023 11:52:30 +0000 (13:52 +0200)
committerGeert Uytterhoeven <geert+renesas@glider.be>
Mon, 25 Sep 2023 07:19:21 +0000 (09:19 +0200)
The SMSC LAN89218AQ Ethernet controller on the Blanche development board
resides in the external address space of the Local Bus State Controller
(LBSC).  Move the Ethernet device node to reflect this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/457239047bc8b5deabf15d816043a89ab00db5ef.1693481518.git.geert+renesas@glider.be
arch/arm/boot/dts/renesas/r8a7792-blanche.dts

index 6a83923aa4612e712e7a703107475906dce531cb..e793134f32a3020a92be41ccece08ebefcad7559 100644 (file)
                regulator-always-on;
        };
 
-       ethernet@18000000 {
-               compatible = "smsc,lan89218", "smsc,lan9115";
-               reg = <0 0x18000000 0 0x100>;
-               phy-mode = "mii";
-               interrupt-parent = <&irqc>;
-               interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-               smsc,irq-push-pull;
-               reg-io-width = <4>;
-               vddvario-supply = <&d3_3v>;
-               vdd33a-supply = <&d3_3v>;
-
-               pinctrl-0 = <&lan89218_pins>;
-               pinctrl-names = "default";
-       };
-
        vga-encoder {
                compatible = "adi,adv7123";
 
        clock-frequency = <48000000>;
 };
 
+&lbsc {
+       ethernet@18000000 {
+               compatible = "smsc,lan89218", "smsc,lan9115";
+               reg = <0x18000000 0x100>;
+               phy-mode = "mii";
+               interrupt-parent = <&irqc>;
+               interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+               smsc,irq-push-pull;
+               reg-io-width = <4>;
+               vddvario-supply = <&d3_3v>;
+               vdd33a-supply = <&d3_3v>;
+
+               pinctrl-0 = <&lan89218_pins>;
+               pinctrl-names = "default";
+       };
+};
+
 &pfc {
        scif0_pins: scif0 {
                groups = "scif0_data";