hw/i2c/aspeed: add DEV_ADDR in old register mode

Add support for writing and reading the device address register in old
register mode.

On the AST2400 (only 1 slave address)

  * no upper bits

On the AST2500 (2 possible slave addresses),

  * bit[31] : Slave Address match indicator
  * bit[30] : Slave Address Receiving pending

On the AST2600 (3 possible slave addresses),

  * bit[31-30] : Slave Address match indicator
  * bit[29] : Slave Address Receiving pending

The model could be more precise to take into account all fields but
since the Linux driver is masking the register value being set, it
should be fine. See commit 3fb2e2aeafb2 ("i2c: aspeed: disable
additional device addresses on ast2[56]xx") from Zeiv. This can be
addressed later.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: add details to commit log ]
Message-Id: <20220601210831.67259-3-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 43ac9491ec36b8e4ac283e3da630984f6d9312ea..f9fce0d84b897549117382520a22e03b6378498e 100644 (file)
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -83,6 +83,7 @@ static uint64_t aspeed_i2c_bus_old_read(AspeedI2CBus *bus, hwaddr offset,
     case A_I2CD_AC_TIMING2:
     case A_I2CD_INTR_CTRL:
     case A_I2CD_INTR_STS:
+    case A_I2CD_DEV_ADDR:
     case A_I2CD_POOL_CTRL:
     case A_I2CD_BYTE_BUF:
         /* Value is already set, don't do anything. */
@@ -720,8 +721,7 @@ static void aspeed_i2c_bus_old_write(AspeedI2CBus *bus, hwaddr offset,
         }
         break;
     case A_I2CD_DEV_ADDR:
-        qemu_log_mask(LOG_UNIMP, "%s: slave mode not implemented\n",
-                      __func__);
+        bus->regs[R_I2CD_DEV_ADDR] = value;
         break;
     case A_I2CD_POOL_CTRL:
         bus->regs[R_I2CD_POOL_CTRL] &= ~0xffffff;

diff --git a/include/hw/i2c/aspeed_i2c.h b/include/hw/i2c/aspeed_i2c.h
index 0cd245a00963ea5bbb2b6c88e079ff277ca98da6..1398befc104d330d65266137bf3c2d9d43fb9ea3 100644 (file)
--- a/include/hw/i2c/aspeed_i2c.h
+++ b/include/hw/i2c/aspeed_i2c.h
@@ -295,6 +295,14 @@ static inline uint32_t aspeed_i2c_bus_cmd_offset(AspeedI2CBus *bus)
     return R_I2CD_CMD;
 }
 
+static inline uint32_t aspeed_i2c_bus_dev_addr_offset(AspeedI2CBus *bus)
+{
+    if (aspeed_i2c_is_new_mode(bus->controller)) {
+        return R_I2CS_DEV_ADDR;
+    }
+    return R_I2CD_DEV_ADDR;
+}
+
 static inline uint32_t aspeed_i2c_bus_intr_ctrl_offset(AspeedI2CBus *bus)
 {
     if (aspeed_i2c_is_new_mode(bus->controller)) {