arm64: dts: qcom: x1e80100-crd: Enable more support

Enable touchscreen, touchpad, keyboard, display, pcie and usb
support.

Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240129-x1e80100-dts-missing-nodes-v6-9-2c0e691cfa3b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 7532d8eca2de334b780f6f91d14885d174896958..7e7cc8e43f8795e78c25ac2990d04f1ba9b9d30f 100644 (file)
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -401,10 +401,145 @@
        };
 };
 
+&i2c0 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       touchpad@15 {
+               compatible = "hid-over-i2c";
+               reg = <0x15>;
+
+               hid-descr-addr = <0x1>;
+               interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+               pinctrl-0 = <&tpad_default>;
+               pinctrl-names = "default";
+
+               wakeup-source;
+       };
+
+       keyboard@3a {
+               compatible = "hid-over-i2c";
+               reg = <0x3a>;
+
+               hid-descr-addr = <0x1>;
+               interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+               pinctrl-0 = <&kybd_default>;
+               pinctrl-names = "default";
+
+               wakeup-source;
+       };
+};
+
+&i2c8 {
+       clock-frequency = <400000>;
+
+       status = "okay";
+
+       touchscreen@10 {
+               compatible = "hid-over-i2c";
+               reg = <0x10>;
+
+               hid-descr-addr = <0x1>;
+               interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+               pinctrl-0 = <&ts0_default>;
+               pinctrl-names = "default";
+       };
+};
+
+&mdss {
+       status = "okay";
+};
+
+&mdss_dp3 {
+       compatible = "qcom,x1e80100-dp";
+       /delete-property/ #sound-dai-cells;
+
+       data-lanes = <0 1 2 3>;
+
+       status = "okay";
+
+       aux-bus {
+               panel {
+                       compatible = "edp-panel";
+                       power-supply = <&vreg_edp_3p3>;
+
+                       port {
+                               edp_panel_in: endpoint {
+                                       remote-endpoint = <&mdss_dp3_out>;
+                               };
+                       };
+               };
+       };
+
+       ports {
+               port@1 {
+                       reg = <1>;
+                       mdss_dp3_out: endpoint {
+                               remote-endpoint = <&edp_panel_in>;
+                       };
+               };
+       };
+};
+
+&mdss_dp3_phy {
+       vdda-phy-supply = <&vreg_l3j_0p8>;
+       vdda-pll-supply = <&vreg_l2j_1p2>;
+
+       status = "okay";
+};
+
+&pcie4 {
+       status = "okay";
+};
+
+&pcie4_phy {
+       vdda-phy-supply = <&vreg_l3j_0p8>;
+       vdda-pll-supply = <&vreg_l3e_1p2>;
+
+       status = "okay";
+};
+
+&pcie6a {
+       status = "okay";
+};
+
+&pcie6a_phy {
+       vdda-phy-supply = <&vreg_l3j_0p8>;
+       vdda-pll-supply = <&vreg_l2j_1p2>;
+
+       status = "okay";
+};
+
+&qupv3_0 {
+       status = "okay";
+};
+
+&qupv3_1 {
+       status = "okay";
+};
+
 &qupv3_2 {
        status = "okay";
 };
 
+&remoteproc_adsp {
+       firmware-name = "qcom/x1e80100/adsp.mbn",
+                       "qcom/x1e80100/adsp_dtb.mbn";
+
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/x1e80100/cdsp.mbn",
+                       "qcom/x1e80100/cdsp_dtb.mbn";
+
+       status = "okay";
+};
+
 &tlmm {
        gpio-reserved-ranges = <34 2>, /* Unused */
                               <44 4>, /* SPI (TPM) */
@@ -416,9 +551,96 @@
                drive-strength = <16>;
                bias-disable;
        };
+
+       kybd_default: kybd-default-state {
+               pins = "gpio67";
+               function = "gpio";
+               bias-disable;
+       };
+
+       tpad_default: tpad-default-state {
+               pins = "gpio3";
+               function = "gpio";
+               bias-disable;
+       };
+
+       ts0_default: ts0-default-state {
+               int-n-pins {
+                       pins = "gpio51";
+                       function = "gpio";
+                       bias-disable;
+               };
+
+               reset-n-pins {
+                       pins = "gpio48";
+                       function = "gpio";
+                       output-high;
+                       drive-strength = <16>;
+               };
+       };
 };
 
 &uart21 {
        compatible = "qcom,geni-debug-uart";
        status = "okay";
 };
+
+&usb_1_ss0_hsphy {
+       vdd-supply = <&vreg_l2e_0p8>;
+       vdda12-supply = <&vreg_l3e_1p2>;
+
+       status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+       status = "okay";
+};
+
+&usb_1_ss0 {
+       status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+       dr_mode = "host";
+       usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+       vdd-supply = <&vreg_l2e_0p8>;
+       vdda12-supply = <&vreg_l3e_1p2>;
+
+       status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+       status = "okay";
+};
+
+&usb_1_ss1 {
+       status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+       dr_mode = "host";
+       usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+       vdd-supply = <&vreg_l2e_0p8>;
+       vdda12-supply = <&vreg_l3e_1p2>;
+
+       status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+       status = "okay";
+};
+
+&usb_1_ss2 {
+       status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+       dr_mode = "host";
+       usb-role-switch;
+};