ARM: dts: rockchip: Remove more clock-names from PWM nodes

A test with the command below gives this error:
/arch/arm/boot/dts/rk3228-evb.dt.yaml:
pwm@110b0020: clock-names: ['pwm'] is too short

Devices with only one PWM clock use it to both to derive the functional
clock for the device and as the bus clock. The driver does not need
"clock-names" to get a handle, so remove them all.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210510172911.6763-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 25f83f2f5618e02369d319ab3ae3a1e2842501c1..5774bc309eb7473c04d6110696d460a94494fded 100644 (file)
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -379,7 +379,6 @@
                reg = <0x110b0000 0x10>;
                #pwm-cells = <3>;
                clocks = <&cru PCLK_PWM>;
-               clock-names = "pwm";
                pinctrl-names = "default";
                pinctrl-0 = <&pwm0_pin>;
                status = "disabled";
@@ -390,7 +389,6 @@
                reg = <0x110b0010 0x10>;
                #pwm-cells = <3>;
                clocks = <&cru PCLK_PWM>;
-               clock-names = "pwm";
                pinctrl-names = "default";
                pinctrl-0 = <&pwm1_pin>;
                status = "disabled";
@@ -401,7 +399,6 @@
                reg = <0x110b0020 0x10>;
                #pwm-cells = <3>;
                clocks = <&cru PCLK_PWM>;
-               clock-names = "pwm";
                pinctrl-names = "default";
                pinctrl-0 = <&pwm2_pin>;
                status = "disabled";
@@ -412,7 +409,6 @@
                reg = <0x110b0030 0x10>;
                #pwm-cells = <2>;
                clocks = <&cru PCLK_PWM>;
-               clock-names = "pwm";
                pinctrl-names = "default";
                pinctrl-0 = <&pwm3_pin>;
                status = "disabled";