iio: adc: ti-ads131e08: Benefit from devm_clk_get_enabled() to simplify

Make use of devm_clk_get_enabled() to replace some code that effectively
open codes this new function.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220808204740.307667-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/drivers/iio/adc/ti-ads131e08.c b/drivers/iio/adc/ti-ads131e08.c
index 32237cacc9a37ca3d43979aadfe45fdebf7d3b3c..5235a93f28bc67c6eec258f518987dbc8be5623c 100644 (file)
--- a/drivers/iio/adc/ti-ads131e08.c
+++ b/drivers/iio/adc/ti-ads131e08.c
@@ -797,13 +797,6 @@ static void ads131e08_regulator_disable(void *data)
        regulator_disable(st->vref_reg);
 }
 
-static void ads131e08_clk_disable(void *data)
-{
-       struct ads131e08_state *st = data;
-
-       clk_disable_unprepare(st->adc_clk);
-}
-
 static int ads131e08_probe(struct spi_device *spi)
 {
        const struct ads131e08_info *info;
@@ -896,21 +889,11 @@ static int ads131e08_probe(struct spi_device *spi)
                st->vref_reg = NULL;
        }
 
-       st->adc_clk = devm_clk_get(&spi->dev, "adc-clk");
+       st->adc_clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
        if (IS_ERR(st->adc_clk))
                return dev_err_probe(&spi->dev, PTR_ERR(st->adc_clk),
                                     "failed to get the ADC clock\n");
 
-       ret = clk_prepare_enable(st->adc_clk);
-       if (ret) {
-               dev_err(&spi->dev, "failed to prepare/enable the ADC clock\n");
-               return ret;
-       }
-
-       ret = devm_add_action_or_reset(&spi->dev, ads131e08_clk_disable, st);
-       if (ret)
-               return ret;
-
        adc_clk_hz = clk_get_rate(st->adc_clk);
        if (!adc_clk_hz) {
                dev_err(&spi->dev, "failed to get the ADC clock rate\n");