s390x/pci: enable for load/store interpretation

If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle.  For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.

By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel.  When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.

Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

diff --git a/hw/s390x/meson.build b/hw/s390x/meson.build
index feefe0717ec41477cc6efefdafaf1310e0bf227f..f291016feeb4f3523a174d56bcada3db788094af 100644 (file)
--- a/hw/s390x/meson.build
+++ b/hw/s390x/meson.build
@@ -23,6 +23,7 @@ s390x_ss.add(when: 'CONFIG_KVM', if_true: files(
   's390-skeys-kvm.c',
   's390-stattrib-kvm.c',
   'pv.c',
+  's390-pci-kvm.c',
 ))
 s390x_ss.add(when: 'CONFIG_TCG', if_true: files(
   'tod-tcg.c',

diff --git a/hw/s390x/s390-pci-bus.c b/hw/s390x/s390-pci-bus.c
index 4b2bdd94b382ff996f6ab0e8d8cec56dbdb15ba2..156051e6e960e634fd8fc24f4f16fcd66329d2a1 100644 (file)
--- a/hw/s390x/s390-pci-bus.c
+++ b/hw/s390x/s390-pci-bus.c
@@ -16,6 +16,7 @@
 #include "qapi/visitor.h"
 #include "hw/s390x/s390-pci-bus.h"
 #include "hw/s390x/s390-pci-inst.h"
+#include "hw/s390x/s390-pci-kvm.h"
 #include "hw/s390x/s390-pci-vfio.h"
 #include "hw/pci/pci_bus.h"
 #include "hw/qdev-properties.h"
@@ -971,12 +972,51 @@ static void s390_pci_update_subordinate(PCIDevice *dev, uint32_t nr)
     }
 }
 
+static int s390_pci_interp_plug(S390pciState *s, S390PCIBusDevice *pbdev)
+{
+    uint32_t idx, fh;
+
+    if (!s390_pci_get_host_fh(pbdev, &fh)) {
+        return -EPERM;
+    }
+
+    /*
+     * The host device is already in an enabled state, but we always present
+     * the initial device state to the guest as disabled (ZPCI_FS_DISABLED).
+     * Therefore, mask off the enable bit from the passthrough handle until
+     * the guest issues a CLP SET PCI FN later to enable the device.
+     */
+    pbdev->fh = fh & ~FH_MASK_ENABLE;
+
+    /* Next, see if the idx is already in-use */
+    idx = pbdev->fh & FH_MASK_INDEX;
+    if (pbdev->idx != idx) {
+        if (s390_pci_find_dev_by_idx(s, idx)) {
+            return -EINVAL;
+        }
+        /*
+         * Update the idx entry with the passed through idx
+         * If the relinquished idx is lower than next_idx, use it
+         * to replace next_idx
+         */
+        g_hash_table_remove(s->zpci_table, &pbdev->idx);
+        if (idx < s->next_idx) {
+            s->next_idx = idx;
+        }
+        pbdev->idx = idx;
+        g_hash_table_insert(s->zpci_table, &pbdev->idx, pbdev);
+    }
+
+    return 0;
+}
+
 static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
                               Error **errp)
 {
     S390pciState *s = S390_PCI_HOST_BRIDGE(hotplug_dev);
     PCIDevice *pdev = NULL;
     S390PCIBusDevice *pbdev = NULL;
+    int rc;
 
     if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)) {
         PCIBridge *pb = PCI_BRIDGE(dev);
@@ -1022,12 +1062,35 @@ static void s390_pcihost_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
         set_pbdev_info(pbdev);
 
         if (object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
-            pbdev->fh |= FH_SHM_VFIO;
+            /*
+             * By default, interpretation is always requested; if the available
+             * facilities indicate it is not available, fallback to the
+             * interception model.
+             */
+            if (pbdev->interp) {
+                if (s390_pci_kvm_interp_allowed()) {
+                    rc = s390_pci_interp_plug(s, pbdev);
+                    if (rc) {
+                        error_setg(errp, "Plug failed for zPCI device in "
+                                   "interpretation mode: %d", rc);
+                        return;
+                    }
+                } else {
+                    DPRINTF("zPCI interpretation facilities missing.\n");
+                    pbdev->interp = false;
+                }
+            }
             pbdev->iommu->dma_limit = s390_pci_start_dma_count(s, pbdev);
             /* Fill in CLP information passed via the vfio region */
             s390_pci_get_clp_info(pbdev);
+            if (!pbdev->interp) {
+                /* Do vfio passthrough but intercept for I/O */
+                pbdev->fh |= FH_SHM_VFIO;
+            }
         } else {
             pbdev->fh |= FH_SHM_EMUL;
+            /* Always intercept emulated devices */
+            pbdev->interp = false;
         }
 
         if (s390_pci_msix_init(pbdev)) {
@@ -1360,6 +1423,7 @@ static Property s390_pci_device_properties[] = {
     DEFINE_PROP_UINT16("uid", S390PCIBusDevice, uid, UID_UNDEFINED),
     DEFINE_PROP_S390_PCI_FID("fid", S390PCIBusDevice, fid),
     DEFINE_PROP_STRING("target", S390PCIBusDevice, target),
+    DEFINE_PROP_BOOL("interpret", S390PCIBusDevice, interp, true),
     DEFINE_PROP_END_OF_LIST(),
 };
 

diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c
index 6d400d41472e34db2218ae10bcd61c93864b90a5..651ec3863506fde22af2432ac244082ab20be873 100644 (file)
--- a/hw/s390x/s390-pci-inst.c
+++ b/hw/s390x/s390-pci-inst.c
@@ -18,6 +18,8 @@
 #include "sysemu/hw_accel.h"
 #include "hw/s390x/s390-pci-inst.h"
 #include "hw/s390x/s390-pci-bus.h"
+#include "hw/s390x/s390-pci-kvm.h"
+#include "hw/s390x/s390-pci-vfio.h"
 #include "hw/s390x/tod.h"
 
 #ifndef DEBUG_S390PCI_INST
@@ -246,6 +248,20 @@ int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra)
                 goto out;
             }
 
+            /*
+             * Take this opportunity to make sure we still have an accurate
+             * host fh.  It's possible part of the handle changed while the
+             * device was disabled to the guest (e.g. vfio hot reset for
+             * ISM during plug)
+             */
+            if (pbdev->interp) {
+                /* Take this opportunity to make sure we are sync'd with host */
+                if (!s390_pci_get_host_fh(pbdev, &pbdev->fh) ||
+                    !(pbdev->fh & FH_MASK_ENABLE)) {
+                    stw_p(&ressetpci->hdr.rsp, CLP_RC_SETPCIFN_FH);
+                    goto out;
+                }
+            }
             pbdev->fh |= FH_MASK_ENABLE;
             pbdev->state = ZPCI_FS_ENABLED;
             stl_p(&ressetpci->fh, pbdev->fh);

diff --git a/hw/s390x/s390-pci-kvm.c b/hw/s390x/s390-pci-kvm.c
new file mode 100644 (file)
index 0000000..0f16104
--- /dev/null
+++ b/hw/s390x/s390-pci-kvm.c
@@ -0,0 +1,22 @@
+/*
+ * s390 zPCI KVM interfaces
+ *
+ * Copyright 2022 IBM Corp.
+ * Author(s): Matthew Rosato <mjrosato@linux.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#include "qemu/osdep.h"
+
+#include "kvm/kvm_s390x.h"
+#include "hw/s390x/pv.h"
+#include "hw/s390x/s390-pci-kvm.h"
+#include "cpu_models.h"
+
+bool s390_pci_kvm_interp_allowed(void)
+{
+    return kvm_s390_get_zpci_op() && !s390_is_pv();
+}

diff --git a/include/hw/s390x/s390-pci-bus.h b/include/hw/s390x/s390-pci-bus.h
index da3cde2bb4257ffba5b22e3f8fdb043399e6a4ed..a9843dfe97d91e72f579acfefc106c5ac5266db7 100644 (file)
--- a/include/hw/s390x/s390-pci-bus.h
+++ b/include/hw/s390x/s390-pci-bus.h
@@ -350,6 +350,7 @@ struct S390PCIBusDevice {
     IndAddr *indicator;
     bool pci_unplug_request_processed;
     bool unplug_requested;
+    bool interp;
     QTAILQ_ENTRY(S390PCIBusDevice) link;
 };
 

diff --git a/include/hw/s390x/s390-pci-kvm.h b/include/hw/s390x/s390-pci-kvm.h
new file mode 100644 (file)
index 0000000..80a2e7d
--- /dev/null
+++ b/include/hw/s390x/s390-pci-kvm.h
@@ -0,0 +1,24 @@
+/*
+ * s390 PCI KVM interfaces
+ *
+ * Copyright 2022 IBM Corp.
+ * Author(s): Matthew Rosato <mjrosato@linux.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+
+#ifndef HW_S390_PCI_KVM_H
+#define HW_S390_PCI_KVM_H
+
+#ifdef CONFIG_KVM
+bool s390_pci_kvm_interp_allowed(void);
+#else
+static inline bool s390_pci_kvm_interp_allowed(void)
+{
+    return false;
+}
+#endif
+
+#endif

diff --git a/target/s390x/kvm/kvm.c b/target/s390x/kvm/kvm.c
index 7bd8db0e7b922efc8ff7f40302f1d0b512fefe56..6a8dbadf7ed0f8a15a8c22e64a439a6c8bc01b9d 100644 (file)
--- a/target/s390x/kvm/kvm.c
+++ b/target/s390x/kvm/kvm.c
@@ -157,6 +157,7 @@ static int cap_ri;
 static int cap_hpage_1m;
 static int cap_vcpu_resets;
 static int cap_protected;
+static int cap_zpci_op;
 
 static bool mem_op_storage_key_support;
 
@@ -362,6 +363,7 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
     cap_s390_irq = kvm_check_extension(s, KVM_CAP_S390_INJECT_IRQ);
     cap_vcpu_resets = kvm_check_extension(s, KVM_CAP_S390_VCPU_RESETS);
     cap_protected = kvm_check_extension(s, KVM_CAP_S390_PROTECTED);
+    cap_zpci_op = kvm_check_extension(s, KVM_CAP_S390_ZPCI_OP);
 
     kvm_vm_enable_cap(s, KVM_CAP_S390_USER_SIGP, 0);
     kvm_vm_enable_cap(s, KVM_CAP_S390_VECTOR_REGISTERS, 0);
@@ -2574,3 +2576,8 @@ bool kvm_arch_cpu_check_are_resettable(void)
 {
     return true;
 }
+
+int kvm_s390_get_zpci_op(void)
+{
+    return cap_zpci_op;
+}

diff --git a/target/s390x/kvm/kvm_s390x.h b/target/s390x/kvm/kvm_s390x.h
index 05a5e1e6f46df5327b996b99f7dc411eb2e3bfb8..aaae8570de5830512932b470eeafb56bc13b6307 100644 (file)
--- a/target/s390x/kvm/kvm_s390x.h
+++ b/target/s390x/kvm/kvm_s390x.h
@@ -27,6 +27,7 @@ void kvm_s390_vcpu_interrupt_pre_save(S390CPU *cpu);
 int kvm_s390_vcpu_interrupt_post_load(S390CPU *cpu);
 int kvm_s390_get_hpage_1m(void);
 int kvm_s390_get_ri(void);
+int kvm_s390_get_zpci_op(void);
 int kvm_s390_get_clock(uint8_t *tod_high, uint64_t *tod_clock);
 int kvm_s390_get_clock_ext(uint8_t *tod_high, uint64_t *tod_clock);
 int kvm_s390_set_clock(uint8_t tod_high, uint64_t tod_clock);