dt-bindings: pinctrl: qcom,sc8180x-tlmm: minor style cleanups

Drop "binding" from description (and align it with other Qualcomm
pinctrl bindings), use double quotes consistently, drop redundant quotes
and rename file to match compatible (to match coding convention).

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221017230012.47878-21-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
deleted file mode 100644 (file)
index 71ca4cf..0000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
+++ /dev/null
@@ -1,152 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Technologies, Inc. SC8180X TLMM block
-
-maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SC8180X platform.
-
-allOf:
-  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
-
-properties:
-  compatible:
-    const: qcom,sc8180x-tlmm
-
-  reg:
-    maxItems: 3
-
-  reg-names:
-    items:
-      - const: "west"
-      - const: "east"
-      - const: "south"
-
-  interrupts: true
-  interrupt-controller: true
-  '#interrupt-cells': true
-  gpio-controller: true
-  gpio-reserved-ranges: true
-  '#gpio-cells': true
-  gpio-ranges: true
-  wakeup-parent: true
-
-required:
-  - compatible
-  - reg
-  - reg-names
-
-additionalProperties: false
-
-patternProperties:
-  '-state$':
-    oneOf:
-      - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
-      - patternProperties:
-          "-pins$":
-            $ref: "#/$defs/qcom-sc8180x-tlmm-state"
-        additionalProperties: false
-
-'$defs':
-  qcom-sc8180x-tlmm-state:
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
-
-    properties:
-      pins:
-        description:
-          List of gpio pins affected by the properties specified in this
-          subnode.
-        items:
-          oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
-            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
-        minItems: 1
-        maxItems: 16
-
-      function:
-        description:
-          Specify the alternative function to be configured for the specified
-          pins.
-
-        enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
-                atest_tsens2, atest_usb0, atest_usb1, atest_usb2, atest_usb3,
-                atest_usb4, audio_ref, btfm_slimbus, cam_mclk, cci_async,
-                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
-                cci_timer4, cci_timer5, cci_timer6, cci_timer7, cci_timer8,
-                cci_timer9, cri_trng, dbg_out, ddr_bist, ddr_pxi, debug_hot,
-                dp_hot, edp_hot, edp_lcd, emac_phy, emac_pps, gcc_gp1, gcc_gp2,
-                gcc_gp3, gcc_gp4, gcc_gp5, gpio, gps, grfc, hs1_mi2s, hs2_mi2s,
-                hs3_mi2s, jitter_bist, lpass_slimbus, m_voc, mdp_vsync,
-                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4,
-                mdp_vsync5, mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1,
-                pci_e2, pci_e3, phase_flag, pll_bist, pll_bypassnl, pll_reset,
-                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss_gpio, qlink,
-                qspi0, qspi0_clk, qspi0_cs, qspi1, qspi1_clk, qspi1_cs,
-                qua_mi2s, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
-                qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
-                qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, sd_write, sdc4,
-                sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu,
-                tsense_pwm1, tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
-                usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
-                wlan1_adc, wlan2_adc, wmss_reset ]
-
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
-    required:
-      - pins
-
-    additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    pinctrl@3100000 {
-        compatible = "qcom,sc8180x-tlmm";
-        reg = <0x03100000 0x300000>,
-              <0x03500000 0x700000>,
-              <0x03d00000 0x300000>;
-        reg-names = "west", "east", "south";
-        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-        gpio-controller;
-        #gpio-cells = <2>;
-        interrupt-controller;
-        #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 190>;
-
-        gpio-wo-subnode-state {
-            pins = "gpio1";
-            function = "gpio";
-        };
-
-        uart-w-subnodes-state {
-            rx-pins {
-                pins = "gpio4";
-                function = "qup6";
-                bias-pull-up;
-            };
-
-            tx-pins {
-                pins = "gpio5";
-                function = "qup6";
-                bias-disable;
-            };
-        };
-    };
-...

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
new file mode 100644 (file)
index 0000000..24191d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8180X TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm SC8180X SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8180x-tlmm
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: west
+      - const: east
+      - const: south
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sc8180x-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+                atest_tsens2, atest_usb0, atest_usb1, atest_usb2, atest_usb3,
+                atest_usb4, audio_ref, btfm_slimbus, cam_mclk, cci_async,
+                cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+                cci_timer4, cci_timer5, cci_timer6, cci_timer7, cci_timer8,
+                cci_timer9, cri_trng, dbg_out, ddr_bist, ddr_pxi, debug_hot,
+                dp_hot, edp_hot, edp_lcd, emac_phy, emac_pps, gcc_gp1, gcc_gp2,
+                gcc_gp3, gcc_gp4, gcc_gp5, gpio, gps, grfc, hs1_mi2s, hs2_mi2s,
+                hs3_mi2s, jitter_bist, lpass_slimbus, m_voc, mdp_vsync,
+                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4,
+                mdp_vsync5, mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1,
+                pci_e2, pci_e3, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss_gpio, qlink,
+                qspi0, qspi0_clk, qspi0_cs, qspi1, qspi1_clk, qspi1_cs,
+                qua_mi2s, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+                qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, sd_write, sdc4,
+                sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu,
+                tsense_pwm1, tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
+                usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
+                wlan1_adc, wlan2_adc, wmss_reset ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@3100000 {
+        compatible = "qcom,sc8180x-tlmm";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x700000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "east", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 190>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup6";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup6";
+                bias-disable;
+            };
+        };
+    };
+...