[media] ezkit/cobalt: drop unused op_656_range setting

The adv7604/adv7842 drivers now handle that register setting themselves
and need no input from platform data anymore.

This was a left-over from the time that the pixelport output format was
decided by the platform data.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index aad5d7416886ed7cdcf2a49f9a428a852a30fc8c..9231e5a72b93e7611d7a47721ed49c75adf423fe 100644 (file)
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -1002,14 +1002,12 @@ static struct adv7842_output_format adv7842_opf[] = {
        {
                .op_ch_sel = ADV7842_OP_CH_SEL_BRG,
                .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_8,
-               .op_656_range = 1,
                .blank_data = 1,
                .insert_av_codes = 1,
        },
        {
                .op_ch_sel = ADV7842_OP_CH_SEL_RGB,
                .op_format_sel = ADV7842_OP_FORMAT_SEL_SDR_ITU656_16,
-               .op_656_range = 1,
                .blank_data = 1,
        },
 };

diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c
index 1aaa2b074f48db8a859c68491a3da39c9bdda832..476f7f0dcf81c0e9aa533e0bfee3df53ae04e3a5 100644 (file)
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -492,7 +492,6 @@ static int cobalt_subdevs_init(struct cobalt *cobalt)
                .ain_sel = ADV7604_AIN7_8_9_NC_SYNC_3_1,
                .bus_order = ADV7604_BUS_ORDER_BRG,
                .blank_data = 1,
-               .op_656_range = 1,
                .op_format_mode_sel = ADV7604_OP_FORMAT_MODE0,
                .int1_config = ADV76XX_INT1_CONFIG_ACTIVE_HIGH,
                .dr_str_data = ADV76XX_DR_STR_HIGH,
@@ -571,7 +570,6 @@ static int cobalt_subdevs_hsma_init(struct cobalt *cobalt)
                .bus_order = ADV7842_BUS_ORDER_RBG,
                .op_format_mode_sel = ADV7842_OP_FORMAT_MODE0,
                .blank_data = 1,
-               .op_656_range = 1,
                .dr_str_data = 3,
                .dr_str_clk = 3,
                .dr_str_sync = 3,